Jump to content

Fg Xr6 Turbo Diff Noise!


stu-e

Recommended Posts

  • Member
  • Member For: 14y 7m 7d

Had the diff replaed a few weeks ago and wine is gone. Apparently this is not uncommon and they had no issues with replacing the diff straight away. Now I have a serious amount of oil leaking from the intercooler.....The hits just keep comming!!!

Link to comment
Share on other sites

  • Replies 39
  • Created
  • Last Reply

Top Posters In This Topic

  • Member
  • Member For: 16y 7m 20d
  • Gender: Male
  • Location: Northern South Australia

For your sake I hope the oil is leaking from some were other than from your intake. As its suposed to be a sealed system from filter back. You may have some real issues if you have a leak, and that you have enough oil to work its way down into the cooler.

Link to comment
Share on other sites

  • 1 month later...
  • Inactive Members
  • Member For: 14y 4m 1d

I have a 2010 FG turbo ute. Between 100-115km/h the diff whines its head off. I am pissed about this. The car has just clocked over 4000kms and now I have a clunk at low speeds which happens when slightly accelerating, usually in traffic. I am off to have the diff inspected tomorrow by Peter Warren Ford. Hopefully they replace it. Keep you posted

I have exactly the same problem. I bought an 2010 FG XR6T ute with 5000k 2 weeks ago. Driving it on the freeway I immediately noticed the whine. I've had a BA XR6 ute since 2003 and recently had the diff replaced by a 3rd party. I'm not sure how I put up with it for so long. Now my new FG has a louder diff than the old BA!

WhenTF are Ford going to get diffs right? Its not like they are a new thing... cars have had them for a few years now!

Anyone know a good dealer in Melb? (close to CBD or western)

Besides that, I love the new ute and the 6 speed auto is great.

Edited by smaldo
Link to comment
Share on other sites

  • Member
  • Member For: 17y 4d
  • Gender: Male
  • Location: Brisbane

The rear vision mirror and to a lesser extent the side mirrors vibrate on rippled roads in mine after fitting the new shocks and springs. Mirror appears to lack mass. Overall, pretty good though.

Think they need to study Toyota build standards. Have had a few toyotas from new and even after years of use nothing rattles, squeks, breaks etc.

I think that this may have changed now though. When I look and hear about their new cars, I think they may have peaked 3 or 4 years ago. I think in some respects, when an owner does have a problem, they can be b*st**rds as good as anyone. Have a read about Prado and Camry oil sludging......

COMPLAINTS CORNER: TOYOTA KLUGER, , ENGINE - COMPLAINTS CORNER.COM

Link to comment
Share on other sites

  • 2 weeks later...
  • Member
  • Member For: 14y 6m 18d

My fg is a 09 model with 12000kms on the clock. I did the first high way way drive last w/e for 3 hours sat then 3 hrs again on sun. I found my diff whine on light acceleration from 100km/hr. I thought it was the turbo at first but it is def the diff. I called my dealer. The only one in Townsville and he told me it is normal. I will try again tomorrow. Has anyone had this this fixed or the Clinton issue fixed?

Thanks Sten

Link to comment
Share on other sites

  • 2 weeks later...
  • Member
  • Member For: 14y 8m 14d
  • Gender: Male
  • Location: Townsville

Took my FG XR6T 09 model in for its 30K service.

Had a few things that I wanted ford to look at - including the diff.

The mechanic when we went for a drive said nar is all the ZF cause it wouldnt do it for that split second when changing gears. Its a real pain at 95kmph, 4th, 5th or 6th gear.

after they had my car for 7 hours they finally came back and said to me that year they were now sure it was the diff.

One for customer and forum (wouldnt have know what to look for unless I read it here)

nill for ford.

So it goes in for new diff in a weeks time.

Painfully really cause I dont rape my car. Sure it gets pushed every now and then but nothing stupid. Cannot aford to replace it. Plus one though for Ford. At least I didnt have to push to get them to fix it. Went really smooth. Does help when you take the car in the spotless.

Sten - this was carmichael ford townsville also.

Had super service with them so far. Didnt get the car there either. Better then when I had my FG ute from Byrne ford Kedron/Chermside in Brisbane.

Edited by Kingo199
Link to comment
Share on other sites

  • 3 weeks later...
  • Member
  • Member For: 14y 8m 14d
  • Gender: Male
  • Location: Townsville

New diff went in today.

They even gave me a loan car to get to work and back.

Car works even better now. Smooth as, no issues any more. Definatly was diff noise.

Ford also noticed that the weather shields were coming unstuck. Restuck them on for me at no cost.

Good service.

Link to comment
Share on other sites

  • Member
  • Member For: 14y 10m 25d

I have the whine at 100k's as mentioned in this thread. FG XR6T ute.

12000k's on the clock now. I'll be taking it in soon for 15000 and hopefully get a fix.

Took it in to ford and they're claiming it's the angle of the diff because I have lowered it.

From reading on here I'm pretty convinced that lowering it will not have caused the problem.

Anybody here with the issue with lowered cars?

Link to comment
Share on other sites

  • It's All In Your Mind
  • Gold Donating Members
  • Member For: 21y 1m 27d
  • Gender: Male
  • Location: Melbourne

Put the stock springs back in the bum and it will still do it, 50% of these cars since the BAs have whiney diffs and the dealer will be well aware of that. Someone at Ford needs their ar$e kicked for allowing the issue and the D/Line shunt issues to go on for 8 years. They are great cars but the build quality is crap.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'