Guest Guests Posted 10/09/08 03:19 AM Share Posted 10/09/08 03:19 AM Guys,After tossing up the idea of a new turbo recently & nearly purchasing a TO4Z combo, my standard turbo decided to let go yesterday. Now that I have the little bit of added motivation behind me to get something done, I want to get some opinions on turbo sizing & specs.I know the TO4Z is a popular choice but what size compressor wheels should I be looking at getting? If a cheap one comes up on ebay or similar, I want to be prepared & know it's the right thing before bidding.Also, would anyone happen to know what a rebuild/balance would cost of the existing turbo? Compressor wheel looks fine as does housing so I'm guessing it's only bearings that need replacing?? If it's firly cost friendly, I might look into getting the ETM stage 1 manifold/gate etc & utilise my gear as I don't see myself wanting too much over the 400 mark if at all. That will only come if the bigger puffer gets put on.Cheers, Dean Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 8d Gender: Male Location: Perth Posted 10/09/08 03:33 AM Share Posted 10/09/08 03:33 AM MTQ can do a new core for around $1200 (ish) Thats a brand new bearing housing/bearing pack and new comp and turbine wheels. You just reuse your old comp and turbine housingsLuke Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 11m 23d Gender: Male Location: SW Sydney Posted 10/09/08 03:42 AM Share Posted 10/09/08 03:42 AM Shoot leigh a message mate, I'm sure he can work something out for you. Even on an exchange sort of basis, using your housings and putting the external gate on there Link to comment Share on other sites More sharing options...
Guest Guests Posted 10/09/08 08:24 AM Share Posted 10/09/08 08:24 AM Thanks for the reply's guys. Just got the old girl back home on the trailer so I'll strip it down over the next few weeks when I get a chance & go from there.Don't want to end up spending nearly the same $$$ rebuilding mine + new manifold/Gate etc as it would cost to buy a TO4Z stage 2 kit so I'll see how bad she is! Link to comment Share on other sites More sharing options...
DUS12 Member 471 Member For: 17y 6m 26d Posted 11/09/08 02:11 AM Share Posted 11/09/08 02:11 AM give 6 boost a call mate he has full packages, I would go bigger than a to4z. cause its a huge spool up difference in spool time with a good manifold, I have a 1200hp garret on mine and its building boost before 3000rpm easy Link to comment Share on other sites More sharing options...
Guest Guests Posted 11/09/08 06:48 AM Share Posted 11/09/08 06:48 AM Who's 6boost??TO4Z will be plenty enough mate as it's a street car that see's the track occasionally, not the other way around Link to comment Share on other sites More sharing options...
pip_brendanAKAfrosty Member 108 Member For: 16y 5m 18d Gender: Male Location: brisbane Posted 11/09/08 01:53 PM Share Posted 11/09/08 01:53 PM yeah I agree, a nice setup to4z would be shweet I recon....I'd get a HKS one though lol Link to comment Share on other sites More sharing options...
DUS12 Member 471 Member For: 17y 6m 26d Posted 11/09/08 09:22 PM Share Posted 11/09/08 09:22 PM 6boost manifolds. 0410730598 kyle is his name, Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 6m 23d Gender: Male Location: OZ Posted 14/09/08 04:14 AM Share Posted 14/09/08 04:14 AM Good chance to go all out with the ETM setup, you already have a load of goodies and this would finish it off nicely :-) Being a bearing failure....was this a result of your leaking turbo oil feed line? Link to comment Share on other sites More sharing options...
Guest Guests Posted 15/09/08 02:56 AM Share Posted 15/09/08 02:56 AM Na they were on the way out before the replacement line went on, hence my decision to change it.Not sure which way I'm going to go now... Been toying with the idea of trading up to BF or FG? I'll leave it upto the bank now Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now