10SECN Member 516 Member For: 11y 6m 23d Gender: Male Location: west hoxton Posted 11/12/14 12:14 PM Share Posted 11/12/14 12:14 PM Grabbed this tiny one off ebay. $40 something delivered. Gave it a coat of satin black to get rid of what ever gay brand is on it. Filled it with steel wool and all good. My car did not need it so far ( zero oil ) after 2000 kms and yes it has hoses connected now Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 25d Gender: Male Location: WA, Perth Posted 12/12/14 02:00 AM Share Posted 12/12/14 02:00 AM ^^^^ you may want To remove the steel wool and put some scourer instead, as per a few posts before in one of the pictures. 1 Link to comment Share on other sites More sharing options...
10SECN Member 516 Member For: 11y 6m 23d Gender: Male Location: west hoxton Posted 12/12/14 03:40 AM Share Posted 12/12/14 03:40 AM yeah that's what I got ... don't know the technical name lol 3 Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 25d Gender: Male Location: WA, Perth Posted 12/12/14 04:30 AM Share Posted 12/12/14 04:30 AM Just making sure as it has been mentioned about the steel wool bit. 1 Link to comment Share on other sites More sharing options...
10SECN Member 516 Member For: 11y 6m 23d Gender: Male Location: west hoxton Posted 12/12/14 09:06 AM Share Posted 12/12/14 09:06 AM Mrs brought home the soap ones to start with 1 Link to comment Share on other sites More sharing options...
GeGe6 Donating Members 1,978 Member For: 12y 4m 17d Gender: Male Location: Perth, SOR Posted 12/04/15 01:32 AM Share Posted 12/04/15 01:32 AM I'm going to run a closed catch can with -6 braided lines on the PCV. I was looking at where the original line come into the Inlet manifold and had a couple of questions.Pic of line coming into manifold.Because I'm going to be running -6 lines I'm working out how to plumb it into the manifold.So first question.Is the elbow threaded into manifold and any idea on size of thread to fit?There is a line teeing off as seen in pic just before manifold, any idea what this is?I'm thinking I cut the original line just before tee piece and plumb -6 line into it, with a barb type fitting.Or running the -6 all the way to manifold reducing at the manifold to fit.If going this way I'll need a tee piece and adapters for the branch off line.Interested to see how others might have plumbed there closed catch cans on the PCV using different size hose. Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 2m 21d Gender: Male Location: Townsville Posted 12/04/15 02:38 AM Share Posted 12/04/15 02:38 AM I'm not sure if that plastic right angle into the manifold is threaded or not as it's in such a cnt of a spot that normal hands won't fit! The spare line I believe either runs to the fuel tank or something on the passenger side right near the firewall? As for plumbing I simply connected mine to the piece that was removed from the pcv and stuck it inline. Maybe if your going to the trouble of -6 then remove that right angle and tap a bigger hole? Link to comment Share on other sites More sharing options...
GeGe6 Donating Members 1,978 Member For: 12y 4m 17d Gender: Male Location: Perth, SOR Posted 12/04/15 02:55 AM Share Posted 12/04/15 02:55 AM Spot on about the position!Was hoping to find a cross over to match the thread size of manifold inlet.Similar to this.And then a -6 tee piece with a barb to much the branch off line. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 1d Gender: Male Location: Perth Posted 12/04/15 02:55 AM Share Posted 12/04/15 02:55 AM I doubt it's threaded, more likely it will just be a push in fitting Link to comment Share on other sites More sharing options...
GeGe6 Donating Members 1,978 Member For: 12y 4m 17d Gender: Male Location: Perth, SOR Posted 12/04/15 03:02 AM Share Posted 12/04/15 03:02 AM Tried to putt a bit of force into it to pull it off and was not coming.I'll break out the hose at the tee and try to spin it out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now