RegSpec Cruise Control 1,417 Member For: 17y 10m 12d Gender: Male Location: Macksville NSW. Posted 03/09/08 10:45 PM Share Posted 03/09/08 10:45 PM I just scored a Herrod Suresix shifter..... Is there much involved in fitting one of these?....do I need a hoist or can I do it on the ground? Checked their site but no fitting instructions... Has anybody else got one of these....what do you think of it? Thanks guys..... Link to comment Share on other sites More sharing options...
teeg Member 372 Member For: 19y 3m 28d Location: SA Posted 04/09/08 06:39 AM Share Posted 04/09/08 06:39 AM I have never done it but you will have to drop the gearbox slightly. Look in the Mal Wood section, theres probabally a few pointers there. Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 5m 21d Gender: Male Location: Sydney NSW Posted 04/09/08 07:57 AM Share Posted 04/09/08 07:57 AM Yeah the box only has to come down an inch or so... its just so you can get thoe the two front bolts that hold the shifter on.Should be ok on stands mate. Drop the box enough to get your fingers in under the tunnel, from the inside.that's how I did my ripshifter.If you want to get crafty I can show you how I shorted the stick an inch on mine... there was a bit of cutting grinding and re-cutting involved lol but its a nice short throw now. Link to comment Share on other sites More sharing options...
RegSpec Cruise Control 1,417 Member For: 17y 10m 12d Gender: Male Location: Macksville NSW. Posted 04/09/08 11:46 AM Author Share Posted 04/09/08 11:46 AM (edited) I only got the shifter...no hardware and no instructions.......but that shouldn't be a major.... My main query is the bolts..... Someone told me that the factory shift is held into the trans by bolts that cut their own thread...kinda like a self tapper?? Is that correct? By the look of it, the bolts that hold it on are big countersunk screws...but I think the ford ones are hex bolts and I don't know what thread they are to go and buy em'...... I dont want to get the thing all pulled apart then find out the bolts wont fit you know...... Edited 04/09/08 11:50 AM by BionicXR6T Link to comment Share on other sites More sharing options...
seventytwo Still have a turbo, it's just on a diesel. Lifetime Members 5,368 Member For: 19y 4m 2d Gender: Male Location: The 8th Dimension Posted 04/09/08 11:54 AM Share Posted 04/09/08 11:54 AM Try this, ford5spdinstall.pdf the gold plate they talk about is a bastard to get out. Link to comment Share on other sites More sharing options...
RegSpec Cruise Control 1,417 Member For: 17y 10m 12d Gender: Male Location: Macksville NSW. Posted 04/09/08 01:53 PM Author Share Posted 04/09/08 01:53 PM (edited) Try this, ford5spdinstall.pdf the gold plate they talk about is a bastard to get out. Yeah, I was told it was a bit of an origami lesson to get out.... thanks heaps seventytwo... :popcorn: Edited 04/09/08 01:59 PM by BionicXR6T Link to comment Share on other sites More sharing options...
RegSpec Cruise Control 1,417 Member For: 17y 10m 12d Gender: Male Location: Macksville NSW. Posted 04/09/08 10:22 PM Author Share Posted 04/09/08 10:22 PM One more quick question...... The shift in those instructions has two little plates you adjust for setting movement of the gate (front and back). Whilst its a different brand of shifter, should I fabricate and fit some of these? Or are the Herrod shifters designed not to use them? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now