Motorolla Bluetooth In Ba Mkii How To(should Be The Same Across The Ra

[quadie]

ok here goes :

located behind the fuse panel (near where u pop ya bonnet), pop the fuse panel cover off

now behind there u will see a few empty plugs locate a 4pin square plug.

the wiring for this plug should be : orange,black,black with yellow trace,green

This is your power feed and ICC trigger point

the second plug u need to find is the Audio input for the ICC, this is a T shaped plug with pink and grey wires

ok so hoping u have the same wire colours as my motorolla kit ( I fitted my kit about 3 yrs ago and dont have a wiring diagram for it)

it sould match this :

4 pin Square plug

CAR | MOTOROLLA

Orange | Red

Black | Black

BLK/Yellow| Green

Green | Orange

2 pin - get the speaker box from the car kit and chop the speaker off. (its not too fussy on polarity this plug)

SPK+ | Pink

SPK - | Grey

Use male spade terminals for both plugs !

I mounted the module in the space on the drivers sider of the ICC behind the panel(other side of the steering wheel to the wiring)

pair up your phone and test

the ICC will go into AUX/PHONE on the display and cuts audio from cd/radio and feeds the bluetooth kit audio ..

I had to mess with the volume of the bluetooth and the icc to get the best sound , but its good

any probs , drop me a pm

Edited 24/08/08 09:23 AM by quadie

[accelrate]

Hey hows it going. Just wondering, have you used the aux input while answering the phone. I just want to know if it mutes that signal or not. Thanks

[tommy3]

I have motorolla b/tooth when using the phone cuts in and shows media on my icc screen

[quadie]

I havent been using an AUX input when I reived a call so I cant answer that mate

and yes mine says media too

[danthedixonman]

What's the model of your original bluetooth module? Reckon a generic ebay cheapy could be wired the same way?

Edited 09/09/08 02:25 PM by danthedixonman