FPV_Steve Donating Members 191 Member For: 17y 6m 6d Gender: Male Location: Brisbane Posted 13/09/08 12:49 AM Share Posted 13/09/08 12:49 AM (edited) Hi HULK_XR6t. I dropped my car off yesterday at the auto shop. Gave him your number and he is going to call you before he calls _______. Hope they front up and pay part of the bill or I WILL be posting there shops name on here! Guys from Brisbane I went to GILROYS AUTO'S at Toowoomba. He quoted me $2200 for a complete rebuild to standard. I am getting him to put in the AU V8 planetries and some other goodies as per a few threads I have read. Will let you know how much the total bill is when the job is done and exactly what was done. His name is Peter Gilroy and he was recommended to me by Paul at ELITE. He is right into drag racing and seems to be really switched on with the BTR 4 speed. Will keep you posted. Edited 13/09/08 12:51 AM by FPV_Steve Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 7m 28d Gender: Male Posted 13/09/08 10:29 AM Share Posted 13/09/08 10:29 AM Hulk-XRT6, can you PM me with your story.From my experience with the BTR4 speed, unless you know how to electronically deal with the shifts, it does not matter how much you modify the internals of the box, you wont achieve the optimal life of the box.Many modify the shifts via the PCM and playing with the S5. Sure this helps but as I have stated before on this forum, eliminating the S3, S4 and S5 solenoids gives you lighting fast shifts and is probably the best way to mod this box for high boost. Not many gearbox builders know how to do this, but will give you an otherwise strong box but without the (IMO) necessary solenoid mods, the shifts just arnt as strong as they could be. Link to comment Share on other sites More sharing options...
PDIDDY Senior Member Member 159 Member For: 18y 1m 1d Gender: Male Posted 16/09/08 05:58 AM Share Posted 16/09/08 05:58 AM Well, I picked my car up an hour ago, and it seems to be OK. I won't know fully until it's been on the Elite dyno tomorrow to have the shift pressures checked. Can't wait to get back out to the strip and give her WOT, and see what she does without a searching box.The service at WSA was very good, and the turn around was really impressive. Now we will see how Graham builds his boxes. So far, so good. Link to comment Share on other sites More sharing options...
PDIDDY Senior Member Member 159 Member For: 18y 1m 1d Gender: Male Posted 17/09/08 06:07 AM Share Posted 17/09/08 06:07 AM Well, just picked it up from Elite, and all is good. Feels very solid, and shift pressures were spot on. The only gripe is that there is a small vibration at idle, which is annoying, so I will be taking it back just to make sure.Now I can't wait to open her up and drive her how she was meant to be driven. Bring on Willowbank. Link to comment Share on other sites More sharing options...
neil101 Donating Members 123 Member For: 19y 1m 15d Gender: Male Location: Kurrajong Heights NSW Posted 05/10/08 10:44 AM Share Posted 05/10/08 10:44 AM Turbo and v8 4 speeds already use the early Au gearsets only the N/A boxes use the lighter gearsets, I'm not sure if the AU 6cly and v8 gearsets are the same or different I just know when mine was gettin rebuilt and needed a new gearset we rang BTR and they said the turbo and v8 boxes use the AU 6cyl gearsetsNeil Link to comment Share on other sites More sharing options...
bkrk06 Member 5 Member For: 16y 1m 29d Posted 12/10/08 06:07 PM Share Posted 12/10/08 06:07 PM Hey guys, I bought my ba mk I xrt that had a new box and autoclutch(torque converter)...it is now on its 4th clutch...the reason 4 the "slip" that u find between 2nd and 3rd gear is bcz the C1 clutch that shifts those gears gets burnt out if the line pressures are not hard enough...especially if your running high power outputs or thrash it alot...I learned this the hard way and forked out $$$$$$ for no reason...what u needa do is take your car 2 get edited or flashed by sum1 who knows what they r doing...u needa increase line pressures for your gear changes...also,wen I gt my car fixd,the cracker charged me 4 a shift kit...$800...wich is bullsh** seeing as editing my flash tuner wulda done the same thing...so b careful and dun get ripped off by idiots...Ben Link to comment Share on other sites More sharing options...
straughsberry Donating Members 1,846 Member For: 17y 3m 10d Gender: Male Location: Broady, Melbourne Posted 12/10/08 06:17 PM Share Posted 12/10/08 06:17 PM Paying a premium for someone's knowledge, experience and expertise is normal and even beneficial. But when a shop or person is a plain rip off then they deserve to be named. Who ever charged you $800 for a "shift kit" is a straight up cheat. If it was me, I'd be naming names so other members can steer clear. And a good tuner is worth every cent because as you've learned the hard way, they can save you big bucks in the longer term.Have fun with it but be safe... Link to comment Share on other sites More sharing options...
forced Member 97 Member For: 18y 10m 30d Gender: Male Location: south australia Posted 13/10/08 01:09 PM Share Posted 13/10/08 01:09 PM HI GUYS JUST OFF THE SUBJECT FOR A MINUTE BUT DOES ANYONE KNOW IF U CAN GET A BILLET FLEX PLATE FOR THE ZF .NEEDED ONE.ANYONE! Link to comment Share on other sites More sharing options...
steve111 Inactive Members 1 Member For: 16y 2m 9d Posted 03/11/08 12:48 PM Share Posted 03/11/08 12:48 PM hows the box holding up PDIDDY ? looking at giving western suburbs auto a call tomorrow and getting some work done. Link to comment Share on other sites More sharing options...
PDIDDY Senior Member Member 159 Member For: 18y 1m 1d Gender: Male Posted 03/11/08 09:59 PM Share Posted 03/11/08 09:59 PM Really good. I'm really pleased with it. Makes it a lot better to drive when you have some confidence in the hardware. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now