MBAF Bronze Donating Members 2,156 Member For: 8y 4m 9d Posted 03/04/17 06:19 AM Share Posted 03/04/17 06:19 AM On 20/11/2016 at 9:38 PM, discostig said: I see you found the quote hahaha If I grind 5mm off the factory stud ends to get those spacers on I'll have the offset of a 9.5 on the rear, that's close enough right? For those that missed it or that read this thread later Advan RG-D, 17x8.5 all round, +33 offset. Factory B series guards, untouched. They clear Brembos but wheel weights need to be riiiiight at the outer edge of the rim or they will hit when cornering hard why dont you get the wheel weights on the inside most part of the rim instead of near the spoke?? Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 1m Gender: Male Location: Probably above atmospheric pressure Posted 03/04/17 07:22 AM Share Posted 03/04/17 07:22 AM Yeah already did just after that Way more had to go on but you can't see them most of the time anyway so no biggie. Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 7m 8d Gender: Male Location: adelaide hills- 'race air' central Posted 03/04/17 10:18 AM Share Posted 03/04/17 10:18 AM just got these for the pajero... http://www.ebay.com.au/itm/292059858603?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Link to comment Share on other sites More sharing options...
PSIFRK Member 312 Member For: 17y 11m 15d Gender: Male Location: Brisbane Posted 17/04/17 12:54 PM Share Posted 17/04/17 12:54 PM (edited) Does anyone know who in australia can supply forgestar F14 super concave rims? Can't seem to find anything. 2nd - if so does anyone know what offset I should be looking at. Its for a fgx g64. Thank you Edited 17/04/17 12:55 PM by PSIFRK Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,984 Member For: 9y 10m 25d Gender: Male Location: South Australia Posted 17/04/17 01:11 PM Share Posted 17/04/17 01:11 PM http://www.magwheelcentre.com.au/forgestar_wheels.html Link to comment Share on other sites More sharing options...
PSIFRK Member 312 Member For: 17y 11m 15d Gender: Male Location: Brisbane Posted 18/04/17 01:00 AM Share Posted 18/04/17 01:00 AM Thanks. I heading down to melbourne next week so that worked out well. Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,984 Member For: 9y 10m 25d Gender: Male Location: South Australia Posted 18/04/17 03:40 AM Share Posted 18/04/17 03:40 AM I looked them up on Google last night so you need to confirm availability etc. Link to comment Share on other sites More sharing options...
NA_TURBO Member 532 Member For: 9y 2m 16d Gender: Male Location: Mildura Posted 29/04/17 07:42 AM Share Posted 29/04/17 07:42 AM New wheels 2 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,054 Member For: 16y 8m 14d Gender: Male Location: Melbourne Posted 08/08/22 06:27 AM Share Posted 08/08/22 06:27 AM 0. Car - BA XR6T 1. Wheel name - TSW Bathurst (thread here for fitment process: https://www.fordxr6turbo.com/forum/topic/96768-tsw-bathurst-on-ba-xr6t-f20x930r20x1040/) 2. Rim Size - F 20x9 R 20x10 3. Tyres/rubber - F 245/35/20 R 275/30/20, Michelin PilotSport 4S 4. Did you lip your guards - "lipping" is same as "rolling", so yes on front and back. 5. Offset - F +30 R +40 6. Price/where - cheap enough, 2nd hand 7. Will Brembo's fit - Yes, they fit on a car with brembo's with a small spacer on the rear to clear the rear caliper. 8. Did u roll the guards - YES on rear, YES and PUMPED/PULLED on front. 9. Is your car lowered - yes, F KFFL-57SL R KFRL-68SSL 10. Does it scrub - NO on back, YES on front: front does a tiny bit on full suspension travel turning left on drivers side & vice-versa... plenty of scrubbing on high suspension travel turning left on passenger side & vice-versa but that's pretty rare and mostly avoidable unless you're drifting and the guard is pumped/pulled enough so that even when these scrubs happen it doesn't damage anything as it's just a flat-ish tyre hitting a flat-ish guard. Pics: 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now