qik1 Silver Donating Members 2,720 Member For: 16y 7m 10d Gender: Male Location: Loitering in SEQ Posted 03/08/08 01:23 PM Share Posted 03/08/08 01:23 PM g'day fellas. ive run out of bits & pieces to chuck at the car to make it go fast without takin the big leap of rebuild, turbo & g/box mods. the only place I havent been is the plenum. has anyone fitted a plenum to the aps ph3 setup. if so what brand & any feedback on performance increase. I spose the next question is it worth me doin it at this point? I will go the whole hog eventually but id like to try & reach a few mile stones with it first. Link to comment Share on other sites More sharing options...
Geeseman Donating Members 1,805 Member For: 21y 1m 23d Location: Sydney Posted 03/08/08 10:05 PM Share Posted 03/08/08 10:05 PM I had an aps phase 3 system on my car and installed a process west plenum on it. The car made no real increase in power. It did however change the torque delivery to decrease it down low and increase it up top. Better for the transmission I thought and made the car more drivable. IMO the only plenum worth fitting for an increase in top power is the nitro because it has it's own short runners whereas all the others usebthe factory bottom runners. I've seen these results first hand on a number of cars. Quite a few cars with the factory plenum have run 10 second passes the fastest f6 used the phase 3 kit with factory plenum. Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 20d Gender: Male Location: Melbourne Posted 03/08/08 11:03 PM Share Posted 03/08/08 11:03 PM Shows how solid/good APS's products are Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 10d Gender: Male Location: Loitering in SEQ Posted 04/08/08 01:23 AM Author Share Posted 04/08/08 01:23 AM I had an aps phase 3 system on my car and installed a process west plenum on it. The car made no real increase in power. It did however change the torque delivery to decrease it down low and increase it up top. Better for the transmission I thought and made the car more drivable. IMO the only plenum worth fitting for an increase in top power is the nitro because it has it's own short runners whereas all the others usebthe factory bottom runners. I've seen these results first hand on a number of cars. Quite a few cars with the factory plenum have run 10 second passes the fastest f6 used the phase 3 kit with factory plenum.who supplies the nitro plenum? just looking for an alternatine to opening it up at the moment. plus a 10sec run is a goal but gettin race fuel up here is near impossible as transport companies are gettin tough on carring dangereous goods. only other solution to race fuel is more hp & torque with the right tune. Link to comment Share on other sites More sharing options...
groper Member 611 Member For: 17y 10m 19d Posted 04/08/08 01:39 AM Share Posted 04/08/08 01:39 AM mix your own mate... buy toluene and xylene from the local paint wholesaler or northern chemicals... that's what I do... Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 10d Gender: Male Location: Loitering in SEQ Posted 04/08/08 03:20 AM Author Share Posted 04/08/08 03:20 AM is there a mix ratio that you use nick? or any particular brand? have you had yours dyno's to see the affect hp wise it has & all the other important bits & pieces. Link to comment Share on other sites More sharing options...
Wingnut Member 573 Member For: 16y 4m 16d Gender: Male Posted 04/08/08 03:44 AM Share Posted 04/08/08 03:44 AM I installed a Nizpro plenum for a 34rwkw increase (307-341). I used Plazmaman piping before hand from their 800hp kit. Link to comment Share on other sites More sharing options...
qik1 Silver Donating Members 2,720 Member For: 16y 7m 10d Gender: Male Location: Loitering in SEQ Posted 04/08/08 07:50 AM Author Share Posted 04/08/08 07:50 AM this is probably gonna sound stupid but has anyone tuned one of these things on av gas? just lookin for an alternative to race fuel & mix myself brews. Link to comment Share on other sites More sharing options...
brute f6 Member 15 Member For: 16y 11m 2d Gender: Male Location: harington park Posted 04/08/08 09:26 AM Share Posted 04/08/08 09:26 AM the nitro plenum? just looking for an alternatine to opening it up at the moment. plus a 10sec run is a goal but gettin race fuel up here is near impossible as transport companies are gettin tough on carring dangereous goods. only other solution to race fuel is more hp & torque with the right tune.you can get nitto plenums from croydon racing developments or cv perfomance;istill think nizpro one works the best Link to comment Share on other sites More sharing options...
brute f6 Member 15 Member For: 16y 11m 2d Gender: Male Location: harington park Posted 04/08/08 09:28 AM Share Posted 04/08/08 09:28 AM this is probably gonna sound stupid but has anyone tuned one of these things on av gas? just lookin for an alternative to race fuel & mix myself brews.try c16 or martini 110 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now