Jump to content

How Do I Launch My T?


Worm

Recommended Posts

  • A much better forum
  • Silver Donating Members
  • Member For: 16y 5m 2d
  • Gender: Male
  • Location: Victoria

Hi guys,

I need some advice...

I bought my BA MK II XR6T a couple of weeks ago with a 6 speed manual...

My problem... I cant take off... LOL When I go to take off quickly I get a massive amount of "turbo lag" (I think that's what it is...) The car seems to bog down...

I haven't owned a turbo before, so I am not used to driving them... I am used to my old xr8...

It has a couple of upgrades and should fly once I get it tuned :-) I am so glad FORD finally brought out a car that can pump a HSV... The guy in the clubby was pissed, especially seeing as he (originally) thought I was driving an XR6 NA cause my car is debadged...

So, my question is... How do I get the best launch? Traction control on/off? How many revs, clutch dump? How much throttle???

Any advice would be greatly appreciated, I want to lead at the other side of the lights and continue to accelerate!!! It is a great feeling to accelerate from a HSV... I had never been able to do it before!

Cheers,

Worm

Edited by seventytwo
Talking about street racing is against forum rules
Link to comment
Share on other sites

  • A much better forum
  • Silver Donating Members
  • Member For: 16y 5m 2d
  • Gender: Male
  • Location: Victoria

Oops... I am new here...

Will shut my mouth...

How do I launch my T for the drag strip? :-) May have to try Caulder...

Worm

Link to comment
Share on other sites

  • Donating Members
  • Member For: 18y 9m 1d
  • Gender: Male
  • Location: nsw

I use the heel toe method to get about 2500 rpm and try and slip it a little (aftermarket clutch) you have to feel it, this gives me a little squeal on takeoff without frying the tyres.

I also use low boost in 1st gear and untill second stops spinning then hit it with full boost.

http://www.youtube.com/watch?v=RFi7zfMWE1M

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 19y 6m 2d
  • Gender: Male

2.5 to 3k rpm clutch slip for me. dont be brutal with the clutch as it wont hang on, but once the car is moving a bti get off it asap. seems to work ok for me!

Link to comment
Share on other sites

  • Boost Addict
  • Member
  • Member For: 16y 5m 3d
  • Gender: Male
  • Location: Perth, W.A.

lol

auto

hold at 2000rpm while on brake

let go off brake, 3/4 throttle... for first 4000rpm... then full throttle to 5500

change

my guage just slides to 5500 in second... as fast as I can blink of my eyes

change again

...

check for cops... or ull loose your car for a week.... if they can catch you :P

Edited by djkice
Link to comment
Share on other sites

  • Member
  • Member For: 16y 11m 3d
  • Gender: Male
  • Location: Canberra

djkice he said he has a manual, why would he want to know about an auto.

Worm:

My suggestion because you have an xr6 turbo clutch is to not slip it or ride it at all. you will wear your clutch out very quickly expecially if its a BA. Rev to 2500 - 3000 and drop it. If your tyres are spinning too much try a bigger burnout

Andrew

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'