The_Bogan Donating Members 881 Member For: 17y 7m 6d Gender: Male Location: Brisbane, Queensland Posted 08/08/08 02:44 AM Share Posted 08/08/08 02:44 AM once again... wouldnt have a clue to be honest.its at its worst at the strip... just after I launch it say at around 4000rpm( probably just before 60ft) it dies in the arse then gets up and goes.the same thing also happens in 1st and 2nd gear at around 5800rpm on the street, and it also happens on the street.have tried almost everything to get rid of these limits.just going to save up and keep on driving the box until it dies, then depending on how the cash situation is looking, put a powerglide in or get the 4spd rebuilt again. Link to comment Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 2m 30d Gender: Male Location: Melb Posted 08/08/08 02:48 AM Share Posted 08/08/08 02:48 AM Sounds like 2 torque limits coming to play there...1st one sounds like the stall convertor limit set to 4000rpm..the second one sounds like either throttle rpm limiter, or shift torque limit (using throttle control)..without datalogging, or seeing the car, I can only speculatebut given your autos making noises in 1st and 4th, that's your plantery's eating away.. it would be in your best opinion to stop driving it now and getting it fixed as your just sending metal through your box. Link to comment Share on other sites More sharing options...
tab Sucker Moderating Team 32,303 Member For: 20y 6m 16d Gender: Male Location: Brisbane Posted 08/08/08 02:51 AM Share Posted 08/08/08 02:51 AM Community Service Announcement.....PLEASE STOP QUOTING UNNECESSARILYClick here for further info Link to comment Share on other sites More sharing options...
2MUCHKW Member 350 Member For: 18y 6m 21d Posted 08/08/08 12:37 PM Share Posted 08/08/08 12:37 PM a 6speed auto will cost you a decent amount yes, but it will require a massive change in wiring looms, abs module too I believe, and various modules reprogrammed to make it work..At the same time, the shifting in the 6speed autos cannot be manipulated greatly, and eventually will shag out much like Mauz's 2 boxes did.a freshened up 4speed auto, tuned right, should easily be able to take 350rwkw with decent reliability. A number of cars I know of are still going strong on their 4speeds.If you were to push the limits over 400, different turbo etc, then yeah.. a 4speed might not be upto the task.Whats happened to Mauz's ZF????????Thought his box was going great since the rebuild?????? Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 7m 10d Gender: Male Posted 08/08/08 01:02 PM Share Posted 08/08/08 01:02 PM Is there anyone on here who has a modified BTR 4sp with the S5, S3 and S4 solenoids basically elliminated so that the box shifts relatively hard 24/7. Link to comment Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 2m 30d Gender: Male Location: Melb Posted 09/08/08 09:15 AM Share Posted 09/08/08 09:15 AM This is what smashed planterys sound like.Locked in first gear doing about 20km/h Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 21y 9m 10d Gender: Male Location: Sydney Posted 09/08/08 11:14 AM Share Posted 09/08/08 11:14 AM I think when my poor ol 4 sp spits its guts out ill turf it and do a auto - manual conversion. Link to comment Share on other sites More sharing options...
our06t Mmmmm......BOOST Member 3,135 Member For: 17y 6m 13d Gender: Male Location: central coast Posted 10/08/08 06:12 AM Share Posted 10/08/08 06:12 AM done it once if it doesn't handle in goes the manual Link to comment Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 2m 30d Gender: Male Location: Melb Posted 10/08/08 08:53 AM Share Posted 10/08/08 08:53 AM http://www.fordxr6turbo.com/forum/index.php?showtopic=48502Link to the rebuild of my 4speed with videos.. Link to comment Share on other sites More sharing options...
straughsberry Donating Members 1,846 Member For: 17y 2m 23d Gender: Male Location: Broady, Melbourne Posted 10/08/08 12:11 PM Share Posted 10/08/08 12:11 PM Thanks for sharing. Interesting about the plans - I guess getting some billet straight cut jobs made up would be way too expensive? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now