GrizzlyF6 Member 87 Member For: 16y 11m 15d Gender: Male Location: Mackay Posted 20/07/08 12:39 AM Share Posted 20/07/08 12:39 AM (edited) OK guys I have mentioned in another thread that I have twisted the tail shaft , blown out the center bearing and the CV on the back of the tail shaft in my A6 typhoon. I was wondering if any one out there knows of a stronger option out there for these cars??? Edited 20/07/08 12:40 AM by GrizzlyF6 Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 2m 13d Gender: Male Location: Melbourne Posted 20/07/08 01:10 AM Share Posted 20/07/08 01:10 AM Does Mal Wood make one? Give him a buzz he'd know who to talk to if he doesn't (07) 4661 3548. Link to comment Share on other sites More sharing options...
ETM Member 1,194 Member For: 17y 10m 30d Gender: Male Location: syd south Posted 20/07/08 01:59 AM Share Posted 20/07/08 01:59 AM any driveshaft engineering shop can make one for you, look in your local phonebook and there will be probably 3 or 4 mobs doing driveshafts Link to comment Share on other sites More sharing options...
2MUCHKW Member 350 Member For: 18y 9m 24d Posted 20/07/08 02:42 AM Share Posted 20/07/08 02:42 AM (edited) OK guys I have mentioned in another thread that I have twisted the tail shaft , blown out the center bearing and the CV on the back of the tail shaft in my A6 typhoon. I was wondering if any one out there knows of a stronger option out there for these cars???Sounds like you need to visitHardy SpicerDriveline & Hydraulic Services323 Nebo RdWest Mackay QLD 4740(07) 4952 3488Let me know how much $$$ for an upgraded driveshaft for I'd best replace mine with a stronger item before this happens to me! Edited 20/07/08 02:49 AM by 2MUCHKW Link to comment Share on other sites More sharing options...
strik9 Banned 146 Member For: 17y 9m 4d Gender: Male Location: AUSTRALIA Posted 21/07/08 07:19 AM Share Posted 21/07/08 07:19 AM I,d rather the weakest link being the tail shaft. easy to get too, u can do it yourself. and its probally cheaper than a gearbox or diff, or cv,s. good luck. mine did the same thing as yours. by the way. but at the back. and lets just say ,I was,nt the driver. and it was from the edit to get of the line at boost. Link to comment Share on other sites More sharing options...
SILK RSPEC Donating Members 193 Member For: 17y 3m 11d Gender: Male Location: Brisbane Southside Posted 28/07/08 04:33 AM Share Posted 28/07/08 04:33 AM http://www.pstds.com/how about a carbon fibre tail shaft imagine thay would never break Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 18y 5d Gender: Male Location: SW Sydney Posted 28/07/08 04:57 AM Share Posted 28/07/08 04:57 AM Is it just me or does that mob seem cheap? I haven't really looked into what drive shafts cost before, but that seems pretty reasonable for a custom tail-shaft! Link to comment Share on other sites More sharing options...
Led Ft Donating Members 112 Member For: 17y 22d Gender: Male Location: Gladstone Posted 30/07/08 10:00 AM Share Posted 30/07/08 10:00 AM that's extreamly cheap even though they are american soo just under double that price but that's still sh*tloads cheaper then some ive priced upbf ford tail shaft is 2.7k lol soo they can stick that up there *** Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 18y 5d Gender: Male Location: SW Sydney Posted 30/07/08 01:02 PM Share Posted 30/07/08 01:02 PM Double? With the current exchange rate, its barely gonna cost you much more than that in AUD Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now