hqracer89 Donating Members 324 Member For: 17y 7m 23d Gender: Male Location: Ballarat Posted 21/06/08 03:08 AM Share Posted 21/06/08 03:08 AM (edited) that's them mate, Conbear is there web site. I only change the one as I had to do a call out for the bearing. (After hours) and this was the only one that was making noise.The headsex tune is going great. It has completely changed the car. Getting a retune soon too, I have a 4 inch intake, moved the Battery and Valve springs have been done so I ready for more boost. Just have to hope the gear box doesn't jump over broad.How is your car going? upgrading any more things yet? Edited 21/06/08 03:09 AM by hqracer89 Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 6m 10d Gender: Male Location: Melbourne, VIC Posted 21/06/08 05:04 PM Author Share Posted 21/06/08 05:04 PM Good to hear buddy...Mines going sweet... Yeah well rego and now some suspension stuff has come up so performance mods are on hold a bit, but next on the list is actuator, cause mine is piss poor...With the bearing thing, I dont know much if anything about them, and the guy never called me back for prices etc... What exactly do I need to replace? The bearings itself or the whole hub? Or does it depend on how bad its gotten? Will probably pop into the CBC place during the week but I need to know what I need exactly, so I can pick it up..Cheers Mike Link to comment Share on other sites More sharing options...
hqracer89 Donating Members 324 Member For: 17y 7m 23d Gender: Male Location: Ballarat Posted 22/06/08 10:15 PM Share Posted 22/06/08 10:15 PM With most new cars you have to buy the wheel bearings as a hub, pre-grased sealed unit. Which includes all of the bearings and wheel studs. Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 6m 10d Gender: Male Location: Melbourne, VIC Posted 23/06/08 08:04 AM Author Share Posted 23/06/08 08:04 AM I sent them an e-mail and they pretty much said exactly what you said hehe. I was quoted $155 for a hub. You said you got yours for $80? You said you did yours yourself so im assuming you bought a new bearing instead of the whole hub and replacing that?Cheers Mike... Link to comment Share on other sites More sharing options...
hqracer89 Donating Members 324 Member For: 17y 7m 23d Gender: Male Location: Ballarat Posted 23/06/08 11:20 AM Share Posted 23/06/08 11:20 AM You can not buy the bearings, you have to buy the hole hub, they are a sealed unit. There is no other way to get them. If you want me to get you two bearings let me know(both sides) and I should be down in Melb this week, so I could drop them off at Danny's house for you. Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 6m 10d Gender: Male Location: Melbourne, VIC Posted 24/06/08 08:43 AM Author Share Posted 24/06/08 08:43 AM Pm sent Link to comment Share on other sites More sharing options...
robbo k Member 414 Member For: 16y 10m 24d Location: Wollongong Posted 24/06/08 09:06 AM Share Posted 24/06/08 09:06 AM CBC - consolidated bearing company. my old man used to work there but work for BSC now same stuff. can get anything from bearings for cars to fanbelts. hose clamps the screw driver ones better then the ones they use these days with the prongs. Link to comment Share on other sites More sharing options...
hqracer89 Donating Members 324 Member For: 17y 7m 23d Gender: Male Location: Ballarat Posted 24/06/08 09:25 AM Share Posted 24/06/08 09:25 AM Do you know that CBC owns BSC, they own about all of the bearing companys in Australia. And the leave them open with other brands so they have all of the market. So your old man is still with CBC, but has a different heading. Link to comment Share on other sites More sharing options...
hanra Into the laaaake Member 1,532 Member For: 17y 8m 17d Gender: Male Location: Nrth Qld Posted 24/06/08 12:41 PM Share Posted 24/06/08 12:41 PM . I have 19's, cheap tyres and TTF (tyre factory) said 40psi...I run 30psi with my 18's. Excessive tyre wear in the centre of the tyre is over inflation. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 7m 23d Gender: Male Location: OZ Posted 25/06/08 02:57 AM Share Posted 25/06/08 02:57 AM The wheel bearing assembly, rotors etc is very to replace as long as you have that big socket! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now