psi999 Member 4 Member For: 16y 9m 18d Posted 19/06/08 05:01 AM Share Posted 19/06/08 05:01 AM Well I'm new here and like most (all? ) new members that join I’ve got a problem that needs sorting.I’ve recently destroyed the rubber drive coupler (or whatever the correct name is) and am after a stronger part, if available.This is a pic of broken goodness.Car is currently making 360rwkw, but has made anywhere from 300 – 470rwkw through various configurations. Has also been used at various race tracks up to speeds of 280km/h-300km/h – so it gets plenty of load on and off the gas.So anything else available or anyone know the part number for the replacement part? (Ford part muppets FTL)(I should also point out that my car is a BA with a T56 fitted over the stock T5 if that makes any difference.)Thanks guys. Link to comment Share on other sites More sharing options...
Xrfranjo Member 350 Member For: 17y 3m 27d Gender: Male Location: Bonnyrigg Heights, NSW Posted 19/06/08 06:38 AM Share Posted 19/06/08 06:38 AM I have a spare turbo complete shaft, but it is to suit an auto and im in sydneyso I dont know if that helps you at all Link to comment Share on other sites More sharing options...
psi999 Member 4 Member For: 16y 9m 18d Posted 19/06/08 06:50 AM Author Share Posted 19/06/08 06:50 AM I have a spare turbo complete shaft, but it is to suit an auto and im in sydneyso I dont know if that helps you at allThanks mate, should be ok for the tailshaft.I's all being re-balanced by my Ford bloke when we re-install a new coupling assy too.... just incase. Link to comment Share on other sites More sharing options...
XR06T Silver Donating Members 4,146 Member For: 19y 5m 27d Gender: Male Posted 20/06/08 12:59 AM Share Posted 20/06/08 12:59 AM I have a similar problem, but mine is not that bad..BA4821B LIST $218.05+that's the part number and trade price of the coupling assembly.I think all of the ba tailshafts are the same btw, auto or manual. Link to comment Share on other sites More sharing options...
nelsonian101 Donating Members 961 Member For: 16y 5m 25d Gender: Male Location: Sydney Posted 02/12/13 09:25 AM Share Posted 02/12/13 09:25 AM Thread revival!Has anyone else broken one of these or checked theirs out to eliminate the slackness in the drivetrain?My car has had the centre diff bush and side bushes replaced but has done 227,000kms on the stock Tailshaft coupler/dough nut bush. Link to comment Share on other sites More sharing options...
quick1300 Member 33 Member For: 11y 6m 29d Gender: Male Posted 02/12/13 01:18 PM Share Posted 02/12/13 01:18 PM I have replaced mine with a kelpro coupling from repco . Lets say its made in Germany and will cost you around half the price from OEBut the auto / manual ones are different as are ba to bf Link to comment Share on other sites More sharing options...
jas98 Member 1,041 Member For: 12y 4m 27d Gender: Male Location: Maryborough Qld Posted 04/12/13 06:27 AM Share Posted 04/12/13 06:27 AM are they different between ba n/a and ba turbo? Link to comment Share on other sites More sharing options...
quick1300 Member 33 Member For: 11y 6m 29d Gender: Male Posted 04/12/13 09:20 AM Share Posted 04/12/13 09:20 AM Probably . I know they are all in the catalogue. Just get the Guys to check I will see if I can get some part numbers tomorrow . 1 Link to comment Share on other sites More sharing options...
quick1300 Member 33 Member For: 11y 6m 29d Gender: Male Posted 04/12/13 10:18 PM Share Posted 04/12/13 10:18 PM Yes they areBa non turbo - KDC1000 - outer diameter 134mmBa turbo KDC1001-outer diameter 142 mm Link to comment Share on other sites More sharing options...
Dave51 New Member 5 Member For: 12y 3m 14d Posted 11/12/13 02:38 AM Share Posted 11/12/13 02:38 AM Did a new one just get fitted? Because that one is incorrectly fitted. The arrows are ment to point to the flang of the output shaft and the flange of the tail shaft.Its hard to explain but the don't last long if they are not lined up right Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now