MJSXR6T Member 13 Member For: 16y 9m 7d Gender: Male Location: Brisbane Posted 12/06/08 03:11 AM Share Posted 12/06/08 03:11 AM Just wondering if the FPV intercooler is that much better thanthe standard XR6T unit and does it bolt directlyin. If this is a viable upgrade, does anyone know whatthey roughly sell for ? Also has anyone done this conversion and how did they find the result?Cheers Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 8m 2d Gender: Male Location: Melbourne Posted 12/06/08 03:13 AM Share Posted 12/06/08 03:13 AM (edited) Not really, Yes and No. The other questions don't need answers Edited 12/06/08 03:14 AM by XRTPSI Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 11m 21d Gender: Male Location: SW Sydney Posted 12/06/08 03:22 AM Share Posted 12/06/08 03:22 AM Just get an aftermarket one, at least a Monza. The factory ones are pretty crap Link to comment Share on other sites More sharing options...
PURVIE Sexy Member Donating Members 524 Member For: 18y 1m 18d Gender: Male Location: Berwick, VIC Posted 12/06/08 06:18 AM Share Posted 12/06/08 06:18 AM If your thinking of upgrading to a fpv cooler, get a monza one, best bang for buck and you can pick them up for about 300-350 bucks new. Link to comment Share on other sites More sharing options...
SLVRXRT Member 28 Member For: 19y 5m 9d Gender: Male Posted 15/06/08 11:03 PM Share Posted 15/06/08 11:03 PM If you want to keep the "factory" look, go the F6 cooler. Link to comment Share on other sites More sharing options...
XR-MAKO New Member 18 Member For: 16y 8m 9d Gender: Male Location: Sydney Posted 16/06/08 03:03 AM Share Posted 16/06/08 03:03 AM I installed a Typhoon cooler on my T on the weekend.You have to drill 2 new holes for the bracket and you will need 2 more bolts and nuts. Typhoon cooler slightly bigger (only where the 2 bolts are on the right hand side) I also used the Typhoon brackets. And have to move horns!!I did get a little more power than the standed cooler, But I used the F6 cooler because I got it for free and wanted to keep the standed look. Link to comment Share on other sites More sharing options...
MH88XR Member 13 Member For: 16y 7m 16d Posted 16/06/08 03:07 AM Share Posted 16/06/08 03:07 AM Just get an aftermarket one, at least a Monza. The factory ones are pretty crapDo you think the monza ones are pretty good for how much they are, if I put one on and got a good tune would it give me much more power? Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 11m 21d Gender: Male Location: SW Sydney Posted 16/06/08 03:36 AM Share Posted 16/06/08 03:36 AM IMO the monza is ok for power under 300rwkw, put it this way, they are better than the factory coolers, but the factory ones are really crap! Link to comment Share on other sites More sharing options...
Ghia Member 191 Member For: 22y 1m 20d Gender: Male Location: Aus.Vic.Melb Posted 16/06/08 12:56 PM Share Posted 16/06/08 12:56 PM I installed a Typhoon cooler on my T on the weekend.You have to drill 2 new holes for the bracket and you will need 2 more bolts and nuts. Typhoon cooler slightly bigger (only where the 2 bolts are on the right hand side) I also used the Typhoon brackets. And have to move horns!!I did get a little more power than the standed cooler, But I used the F6 cooler because I got it for free and wanted to keep the standed look.They are a direct swap over. I used the same mounts and same number of bolts when I went from an XR to a F6 one..... BA - BF differ though, which may be where you got the differences. Link to comment Share on other sites More sharing options...
bad inferno Member 130 Member For: 19y 5m 12d Posted 26/07/08 11:47 AM Share Posted 26/07/08 11:47 AM I installed aFPV cooler today, just an swap over everthing just lined up OK although it was FPV-BA to xr6-BA.... Was able to do it without taking the front bar off.rob Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now