Jump to content

Recommended Posts

  • Toughest BA Turbo
  • Lifetime Members
  • Member For: 22y 4m
  • Gender: Male
  • Location: Sydney
Brian (BCL) has over 400rwkw's with his stock ZF box and has taken it down the strip several times with no dramas!!!

Not just me; F6BF (Jim), Mauz, and FSIX (Mark) have done a lot more passes than me with more power.

Make sure you change the pan and oil if you have quite a few k's on the car. I have 33k km on mine, used as a daily driver.

Mauz upgraded his ZF.

Around 400rwkw would seem to be OK. I doubt the 500rwkw would last, and would most likely break the input shaft, as Tom did in WA when he tried big power.

Brian

  • Member
  • Member For: 17y 4m 30d
  • Gender: Male
  • Location: Melbourne

that's really impressive. I would have thought I would have seen more responses regarding blown ZFs given the amount of modded T's in here, but looks like they can take quite a beating.

  • Member
  • Member For: 19y 6m
that's really impressive. I would have thought I would have seen more responses regarding blown ZFs given the amount of modded T's in here, but looks like they can take quite a beating.

44,000 klm's many many 1/4 mile passes, 360rwkw street, 385rwkw track, I changed my fluid to trans max z after slight delay from 1st to 2nd at the track that was over 12 months ago.

Auto is fine, just seems to change slow compared to a build one.

Dont abuse it on the street, save the abuse for the track, a factory zf auto is good enough for a 10sec pass as long its boosting of the line.

beware dont use trans max z if you want to keep your warranty

Edited by FSIX
  • Member
  • Member For: 17y 7m 7d

My BF XR6T sedan has a totally unmodified zf and handles 345rwkw. It will go into "safe mode" if over-reved or pushed to hard on a track day. I cannot drive in manual mode at Wakefield as it will continually shut down. In performance or auto it is usually ok. Eastern Creek is different as it suits the heavier cars. On the street no problems at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'