the phantom Member 26 Member For: 16y 5m 28d Posted 06/06/08 10:28 AM Share Posted 06/06/08 10:28 AM I know alot of people do these flash tune things but I have used aftermarket ecu's on most of the other cars Iv ever built, admitedly this is the first XR6T Iv ever built but I want to go with a motec or a wolf 3D or something of that caliber. Which is the best work shop to supply and fit/tune I was thinking of Anthony Rodrigous from MAZTEC of melbourne because he is such a highly regarded tuner but if you guys have had them fitted and tuned on your XR6T's elseware could you tell me where and who to talk to. Any help would be appreciated Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 7m 5d Gender: Male Location: Victoria Posted 06/06/08 10:32 AM Share Posted 06/06/08 10:32 AM Why use an aftermarket ECU?Motec has no soft rev cut and can't control idle as well as the factory PCM. Link to comment Share on other sites More sharing options...
the phantom Member 26 Member For: 16y 5m 28d Posted 06/06/08 11:16 AM Author Share Posted 06/06/08 11:16 AM when I spoke to anthony he asked me how far I want to go power wise with this car and I told him I want to go 400rwkw+++, he said that he was going to research what software was availible for the factory ECU and what the go is with the map censor etc, He said he would think that if im going to go that far, then I would be best to go an aftermarket ecu with a 3 bar map censor and all the other goodies, as I said though this is the first XR6T Iv ever owned so I sialing through uncharted teritory at the moment. Anthony also said that he hadn't done many XR's lately so he would investigate how far I can go with the stock ecu. Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 7m 5d Gender: Male Location: Victoria Posted 06/06/08 11:27 AM Share Posted 06/06/08 11:27 AM It sounds like you should use a different tuner with more XR6T experience.Standard PCM has been used for up to 600rwkw's. Link to comment Share on other sites More sharing options...
the phantom Member 26 Member For: 16y 5m 28d Posted 06/06/08 11:41 AM Author Share Posted 06/06/08 11:41 AM that's insane, Im all ears then, do you know of any tuners in melbourne that you would recomend because I would be wraped if I could stay with the stock ecu and get my 400 odd rwkw, cheers for the advice man you have probably saved me some cash and hassle Link to comment Share on other sites More sharing options...
F6_Charlie Donating Members 1,001 Member For: 20y 3m Gender: Male Posted 06/06/08 11:44 AM Share Posted 06/06/08 11:44 AM Go talk to simon at nizpro mate Link to comment Share on other sites More sharing options...
the phantom Member 26 Member For: 16y 5m 28d Posted 06/06/08 11:49 AM Author Share Posted 06/06/08 11:49 AM (edited) ok cheers for that mate are they still in bayswater, if so ill pop in there on tuesday and see simon, hopefully he can make some sort of plan up with me to build this car up the way I want it. Edited 06/06/08 11:57 AM by Dagabond Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 7m 5d Gender: Male Location: Victoria Posted 06/06/08 02:02 PM Share Posted 06/06/08 02:02 PM That sounds like the best plan to me. Link to comment Share on other sites More sharing options...
the phantom Member 26 Member For: 16y 5m 28d Posted 06/06/08 11:26 PM Author Share Posted 06/06/08 11:26 PM yeah for sure, it was just a matter of findind a tuner that knows the cars well and can help me achive the power figure im after Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 3m 10d Gender: Male Location: Melbourne, VIC Posted 07/06/08 01:31 AM Share Posted 07/06/08 01:31 AM Hope you have DEEP pockets.. Nizpro are probably the best but not the cheapest.. 400rwkw = $$$$$$Anyway good luck, one more monster T in Melb WoOOoT Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now