Jump to content

Standard Xr6t Accelaration Problem


Recommended Posts

  • Member
  • Member For: 16y 8m 29d

03 ba xr6t :trying to work out what this is car idles ok and with moderate accelaration is smooth and no problem but when you put the boot in its like its missing or starving for fuel have changed fuel filter plugs and tightened all manifold and turbo bolts have read lots of posts about coil problem car has 80k on clock also tps maybe but idles ok just not sure if anyone has had some problem I would appreciate the input thanks

Link to comment
Share on other sites

  • Member
  • Member For: 16y 8m 29d
Get your car checked out by someone qualified so they can determine if its a fuel pump etc.

had it checked today no fault codes came up everything working so it said but still doing it. I read on another post about the cat collapsing what he said was happening sounds the same maybe that's it will have to keep looking I guess thanks for the help.

Link to comment
Share on other sites

  • 1 year later...
  • Member
  • Member For: 16y 1m 22d
  • Gender: Male
  • Location: Brisbane North

Yeah when mine had the prob it came up with a wastegate error code so im assuming its not your cat as a code would have come up.

Link to comment
Share on other sites

  • Member
  • Member For: 21y 1m 20d
  • Location: BRISBANE

anyone had a mis or low idle shudder after starting for the 1st 30 sec esp if you droip it into R straight away after 4-5 days sitting in the garage dont get it as much if start everyday

Link to comment
Share on other sites

  • 4 weeks later...
  • Member
  • Member For: 16y 3m 25d
  • Gender: Male
  • Location: melbourne
had it checked today no fault codes came up everything working so it said but still doing it. I read on another post about the cat collapsing what he said was happening sounds the same maybe that's it will have to keep looking I guess thanks for the help.

dunno if its fixed or not yet but if its not then its not tps related that throws a code...

get ford to run power balance that will tell u what cylinders are misfiring....or you can use an infrared laser heat gun to determine which runners on your manifold are hotter or colder to determine misfires...

and if its 1 for example change coil 1 and 2 if it doesnt move then change plug 1 and 2 if it then still dont work who knows hahaha...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'