groper Member 611 Member For: 17y 10m 17d Posted 03/08/08 08:32 AM Author Share Posted 03/08/08 08:32 AM you can fit it yourself if your handy with a bit of electrical work... a little soldering is required...yep its all in one package the size of 2 matchboxs... Link to comment Share on other sites More sharing options...
Craig. Member 563 Member For: 17y 8m 29d Gender: Male Location: Sunshine Coast QLD Posted 03/08/08 08:40 AM Share Posted 03/08/08 08:40 AM Cost?Do the flat shifting and launch control come as one package, so to speak? Enquiring minds want to know mate!What else can you tell us? Details please! Link to comment Share on other sites More sharing options...
groper Member 611 Member For: 17y 10m 17d Posted 03/08/08 08:54 AM Author Share Posted 03/08/08 08:54 AM ok well, I dont have alot of time at present but it goes somthing like this...First you remove the rocker garnish and pair back and expose one of the 2 wires going to each coil pack. You then solder on a wire to each coil without cutting it. These wires are then reinsulated and the rocker cover replaced with an extra bundle coming out the back near the firewall. This then goes inside the car to where you mount the box up behind the dash or similar...The then have a choice of where to mount your switches... I chose to do a "no holes" install and mount them all in a junction box cable tied to the center console beside my left knee. alternatively, you could use some of the cruise control buttons on your steering wheel or what ever you want.The idea is is you now have 2 spark cut rev limiters that can be set by pressing a momentary switch for each, and activated by pressing another for each... so you need 4 buttons or switches in total. I use 1 for launch control and the other for a flatshift limiter.The unit takes a split second to "remember" the rpm at which you hit the button. So its very quick and easy to do as I showed in the vid.The unit then cuts spark to alternate cylinders to keep the RPM in check when you active it and this happens without the PCM "knowing" whats going on so it keeps the throttle open and fuel injectors squirting. This builds the boost and prevents the blow off valve from opening if the throttle were closed.Very simple, but very effective. Link to comment Share on other sites More sharing options...
Mr Man Mad Scientist Member 816 Member For: 20y 19d Gender: Male Location: Vic Posted 03/08/08 09:40 AM Share Posted 03/08/08 09:40 AM sounds good.do you have an approx price in mind yet? Link to comment Share on other sites More sharing options...
groper Member 611 Member For: 17y 10m 17d Posted 03/08/08 11:11 AM Author Share Posted 03/08/08 11:11 AM its published earlier in the thread... they cost around $300 Link to comment Share on other sites More sharing options...
jetute Donating Members 4,553 Member For: 20y 10m 17d Gender: Male Location: brisbane Posted 16/08/08 12:05 AM Share Posted 16/08/08 12:05 AM whats the go with this? has it been tested on the track yet? if so what 60 foot did you get and what ET?looking forward to the proven result as I have a friend that may be keen. Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 18d Gender: Male Location: Melbourne Posted 18/08/08 11:19 PM Share Posted 18/08/08 11:19 PM Where do I sign Groper? Link to comment Share on other sites More sharing options...
hqracer89 Donating Members 324 Member For: 17y 5m 11d Gender: Male Location: Ballarat Posted 19/08/08 12:21 AM Share Posted 19/08/08 12:21 AM Is this the same as the Bee-R that is made in Japen? Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 10m 11d Gender: Male Location: SW Sydney Posted 19/08/08 12:30 AM Share Posted 19/08/08 12:30 AM Judging by how the FG's sound, this should be similar, the Bee*R Limiter is much harsher - a hard-cut limiter - the Ford one is soft cut Link to comment Share on other sites More sharing options...
hqracer89 Donating Members 324 Member For: 17y 5m 11d Gender: Male Location: Ballarat Posted 19/08/08 12:33 AM Share Posted 19/08/08 12:33 AM Bee-R can be ajusted with the controller. So you can have it which eva way you want Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now