truongski Member 129 Member For: 17y 5m 20d Gender: Male Location: Brisbane Posted 18/05/08 12:16 AM Share Posted 18/05/08 12:16 AM Hey lads,Pulled off the intake pipe for the turbo yesterday and I noticed on one of the blades , it has a bit of wear. Is this something I should be concerned about? Will it shear off?Stock 05 BA MkII Ute, K&N , no BOV, no centre muffler, 59000 kmsthanks..By truongski Link to comment Share on other sites More sharing options...
mic Donating Members 1,725 Member For: 16y 10m 4d Gender: Male Posted 18/05/08 03:07 AM Share Posted 18/05/08 03:07 AM Could be your turbo getting too hot. Maybe replace the oil screen. Or get one of etms ones. Link to comment Share on other sites More sharing options...
2fardown Member 526 Member For: 19y 6m 10d Gender: Male Location: Brisbane Posted 18/05/08 03:34 AM Share Posted 18/05/08 03:34 AM Poor filteration Link to comment Share on other sites More sharing options...
truongski Member 129 Member For: 17y 5m 20d Gender: Male Location: Brisbane Posted 18/05/08 03:48 AM Author Share Posted 18/05/08 03:48 AM Poor filterationya reckon? I'm sure there are heaps of people using k&n panel filter. I don't think it's poor filtration. Link to comment Share on other sites More sharing options...
truongski Member 129 Member For: 17y 5m 20d Gender: Male Location: Brisbane Posted 18/05/08 03:50 AM Author Share Posted 18/05/08 03:50 AM Could be your turbo getting too hot. Maybe replace the oil screen. Or get one of etms ones.how is it different from the factory oil screen? and where can I get the 'etms' ones? Link to comment Share on other sites More sharing options...
hanra Into the laaaake Member 1,532 Member For: 17y 5m 7d Gender: Male Location: Nrth Qld Posted 18/05/08 03:52 AM Share Posted 18/05/08 03:52 AM This is the ETM item: http://www.fordxr6turbo.com/forum/index.php?showtopic=45049Or just replace your stock one. Link to comment Share on other sites More sharing options...
XRPete Member 673 Member For: 17y 2m 12d Gender: Male Location: Here Posted 18/05/08 03:52 AM Share Posted 18/05/08 03:52 AM just easier access and bigger filter.Etms a site sponsor Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 6m 27d Gender: Male Location: Victoria Posted 18/05/08 03:57 AM Share Posted 18/05/08 03:57 AM The turbo is water cooled.I don't think heat is your problem.To be honest I can't see much from the pic. It's not very clear. Link to comment Share on other sites More sharing options...
2fardown Member 526 Member For: 19y 6m 10d Gender: Male Location: Brisbane Posted 18/05/08 04:13 AM Share Posted 18/05/08 04:13 AM ya reckon? I'm sure there are heaps of people using k&n panel filter. I don't think it's poor filtration.Suit yourself mate. Have a read of this:http://www.aa1car.com/library/turbo_repair.htm"If the compressor blades are badly eroded, unfiltered air has been entering the intake system. Check for a missing, torn or poor fitting air filter." Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 7m 22d Gender: Male Posted 18/05/08 04:24 AM Share Posted 18/05/08 04:24 AM if its on the leading edge of the blades then its filtration. You are basically sandblasting that leading edge, but still shouldnt happen with a K&N. I use one where alot of sand accumulates on the a K&N pod an no real issues Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now