Goliath Member 383 Member For: 14y 4m 2d Gender: Male Location: Sydney Posted 27/02/12 04:32 AM Share Posted 27/02/12 04:32 AM Yer so blocked my bov off and u can only hear the littlest flutter at high revs once u change gears. Bit of a let down maybe I should just vent the stock oneSent from my left nut using my right handHave you tried just backing of the accelerator? I removed the BOV yesterday and could hear it quite easily. Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 5m 25d Gender: Male Posted 27/02/12 04:41 AM Share Posted 27/02/12 04:41 AM FG's run more boost than BA's do. Link to comment Share on other sites More sharing options...
.BLKPHN. Bronze Donating Members 283 Member For: 13y 8m 27d Gender: Male Posted 27/02/12 05:39 AM Share Posted 27/02/12 05:39 AM If you block the bov should be able to hear it easy ayy Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 3m 29d Gender: Not Telling Posted 27/02/12 05:56 AM Share Posted 27/02/12 05:56 AM (edited) Yer so blocked my bov off and u can only hear the littlest flutter at high revs once u change gears. Bit of a let down maybe I should just vent the stock oneSent from my left nut using my right handMaybe just check that all piping is is nice and tight and no split connectors. I only have stock boost and you can hear mine no trouble. I might add to reduce under bonnet temps I removed the hoodlining and the rubber rear bonnet strip (running across top of firewall) to allow air to escape, so I'm sure this adds to the sound. Cheers Edited 27/02/12 05:58 AM by Impellor Link to comment Share on other sites More sharing options...
ssstututu Member 88 Member For: 12y 11m 3d Posted 27/02/12 07:55 AM Share Posted 27/02/12 07:55 AM I noticed my clamps where quite loose so did tigthen them up but I might remove the headliner and the rubber seal also do u have a k&n filter im still running all the stock gear this mod was my first Sent from my left nut using my right hand Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 3m 29d Gender: Not Telling Posted 27/02/12 08:23 AM Share Posted 27/02/12 08:23 AM (edited) I noticed my clamps where quite loose so did tigthen them up but I might remove the headliner and the rubber seal also do u have a k&n filter im still running all the stock gear this mod was my firstSent from my left nut using my right handYeah running K&N and a big arse pipe. The pics should give you an idea. In 1 there is the pipe which is 150mm aluminum ducting that I flattened and cut out of the lower section on the airbox. The other is where I followed the rubber mounted on bonnet and trimmed away the snorkel with the grinder, Cheers http://s1191.photobu...mpellor/Intake/ Edited 27/02/12 08:26 AM by Impellor Link to comment Share on other sites More sharing options...
ssstututu Member 88 Member For: 12y 11m 3d Posted 27/02/12 12:43 PM Share Posted 27/02/12 12:43 PM will be doin this then impellor Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now