tevita6T Member 138 Member For: 17y 4m 12d Gender: Male Location: Brisbane Posted 14/05/08 05:35 AM Share Posted 14/05/08 05:35 AM HI guysAs the title states, I'm looking for around 280 or so rear wheel kilowatts. I drive a BA MK2 turbo ute.. Whats the best way of going about this? I was thinking:full exhaustinjectors; siemens deka or bosch 968FMIC; one of the forum sponsorsCAI (currently have SS growler; thoughts?? under batter one?)ford flasher (of course)possible valve springsAny thoughts, opinions, help etc welcome. Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 2d Gender: Male Location: Melbourne Posted 14/05/08 05:40 AM Share Posted 14/05/08 05:40 AM (edited) Valve springsInjectorsCatCustom tuneCooler (if you have the money)Intake doesn't make all that much difference. Just get the F6 CAI it's a cheap mod.You don't need to do a full exhaust, just the Cat will free it up to at least 320 to 330rwkw. Edited 14/05/08 05:44 AM by R-SPEC Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 6m 6d Gender: Male Location: Melbourne Posted 14/05/08 05:41 AM Share Posted 14/05/08 05:41 AM That would just about do it mate, maybe a fuel pump and definitely valve springs too. Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 25d Gender: Male Location: SW Sydney Posted 14/05/08 05:43 AM Share Posted 14/05/08 05:43 AM You've pretty well got it covered mate.Exhaust - Stock one will do it, just need to change the cat and maybe the cat-back exhaust for some easier flow.Injectors - The Bosch 968's will do the job easy, siemens if you plan on going well over 300Cooler - any of the sponsor coolers will handle this powerCAI - your growler is perfectFlash Tuner - answered your own question!Valve springs may handle it for a while, but better to change them especially in a BA300 is getting easier and easier to get to know mate - enjoy! Link to comment Share on other sites More sharing options...
tevita6T Member 138 Member For: 17y 4m 12d Gender: Male Location: Brisbane Posted 14/05/08 05:44 AM Author Share Posted 14/05/08 05:44 AM any particular brand for each item? injectors? Valve springs? cat size?? Link to comment Share on other sites More sharing options...
tevita6T Member 138 Member For: 17y 4m 12d Gender: Male Location: Brisbane Posted 14/05/08 05:45 AM Author Share Posted 14/05/08 05:45 AM Sorry SennaT, that was meant for the two posts before yours.. thanks heaps guys..>> replies have come so quick! Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 2d Gender: Male Location: Melbourne Posted 14/05/08 05:46 AM Share Posted 14/05/08 05:46 AM 4" cat will do it, Nizpro valve springs (check out the group buy section) and injectors you can either go the 62lb Siemens, Bosch or whatever your favorite tuner uses. Link to comment Share on other sites More sharing options...
Dirty32 Legendary member!! Donating Members 1,739 Member For: 17y 10m 10d Gender: Male Location: Dianella, West Oz Posted 14/05/08 05:46 AM Share Posted 14/05/08 05:46 AM Those mods should comfortably see you over the 300rwkw mark?From memory your driving a manual - I know some ppl's clutches get a bit iffy around the 280 mark so might want to look into that.To see 280, you would probably be able to miss out on a full exhaust, intercooler and valve springs.You could do it with a Tune, Injectors and CAI. If ya wanna take it further then a fuel pump (cheap insurance), Cat & clutch would be more suitable mods than the cooler and full exhaust.If you were to throw a cooler and exhaust on, it would make more power or the same power with less boost.Correct me if im wrong ppl!!! Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 25d Gender: Male Location: SW Sydney Posted 14/05/08 05:47 AM Share Posted 14/05/08 05:47 AM The cat you will need a 4" bodied one, no smaller than this - 5" is preferable.Injectors as I said 968's will do it up to around 350rwkwValve springs - Atomic ones are a bit cheaper than Nizpro, both are good items, will handle your power with ease Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 2d Gender: Male Location: Melbourne Posted 14/05/08 05:48 AM Share Posted 14/05/08 05:48 AM (edited) The stock BA cooler won't do any favors. They're sh1thouse aren't they? Edited 14/05/08 05:53 AM by R-SPEC Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now