purple headed warrior Member 33 Member For: 19y 1m Gender: Male Location: Toowoomba, QLD Posted 09/05/08 05:14 AM Share Posted 09/05/08 05:14 AM Well, I had my first ever dyno reading today (At Brisbane turbo), that was an experience, seeing all the clamps and chains going on made we wonder what on earth could happen here?That got the nerves going, then the guy noticed that the rear tyres were a bit low and asked myself and my mate to sit on the tailgate while he took the reading. Wow that was an experience and a half!! All sorts of thoughts and scenarios ran through my head.As he wound it up the tyres started to slip a bit and is stepped out a little before settling down, then came the queer feeling of sitting on the back with the engine going flat bikky and not going anywhere, then came the smoke which really freaked me out. The exhaust got hot and began to burn the paint off, as soon as John (the dyno guy) told me that my heart rate dropped by 50%.Anyway, it was a great experience and a great result was achieved, even gave John a surprise.If you have not had a dyno reading, go do it!! It's worth the few pennies it costs. Link to comment https://www.fordxr6turbo.com/forum/topic/45337-had-dyno-reading-today/ Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 5m 1d Gender: Male Location: Melbourne Posted 09/05/08 05:27 AM Share Posted 09/05/08 05:27 AM Why on Earth did you not post the read out? Link to comment https://www.fordxr6turbo.com/forum/topic/45337-had-dyno-reading-today/#findComment-673467 Share on other sites More sharing options...
tab Sucker Moderating Team 32,303 Member For: 21y 6d Gender: Male Location: Brisbane Posted 09/05/08 05:31 AM Share Posted 09/05/08 05:31 AM Didn't they have an air compressor? And what paint was it burning off? Link to comment https://www.fordxr6turbo.com/forum/topic/45337-had-dyno-reading-today/#findComment-673470 Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 22y 3m Gender: Male Location: Sydney Posted 09/05/08 05:34 AM Share Posted 09/05/08 05:34 AM Stepped out a little on the rollers when the car makes 236rwkw?Did they strap it down properly?Ive witnessed plenty of cars making over 550rwkw, and they sure dont "step out"!!!! Link to comment https://www.fordxr6turbo.com/forum/topic/45337-had-dyno-reading-today/#findComment-673471 Share on other sites More sharing options...
CJ_AK cj_ak Donating Members 5,077 Member For: 17y 10m 1d Gender: Male Location: Ropes Crossing Posted 09/05/08 05:38 AM Share Posted 09/05/08 05:38 AM Bit of advice, 'Do not stand in front of the car'..... Link to comment https://www.fordxr6turbo.com/forum/topic/45337-had-dyno-reading-today/#findComment-673473 Share on other sites More sharing options...
purple headed warrior Member 33 Member For: 19y 1m Gender: Male Location: Toowoomba, QLD Posted 09/05/08 06:03 AM Author Share Posted 09/05/08 06:03 AM To answer comments/Questions1. Why on Earth did you not post the read out? - I'm at work and don't have a scanner. Hopefully I can do it tonight for you.2. Didn't they have an air compressor? And what paint was it burning off? - don't know and the paint was from the exhaust. The dude who installed it painted it black.3. Stepped out a little on the rollers when the car makes 236rwkw?Did they strap it down properly?Ive witnessed plenty of cars making over 550rwkw, and they sure dont "step out"!!!! - Perhaps step out was the wrong term. It moved sideways a bit on the dyno rollers, that is a little scay when you are sitting on the car. It had 2 big clamps on the front and a big chain on the back so I guess it was strapped down properly. My tyres are well worn, just below wear line, getting new tyres on Monday.4. Bit of advice, 'Do not stand in front of the car'..... - Sounds like there is a story behind this comment. Care to share? Link to comment https://www.fordxr6turbo.com/forum/topic/45337-had-dyno-reading-today/#findComment-673480 Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 5m 1d Gender: Male Location: Melbourne Posted 09/05/08 06:13 AM Share Posted 09/05/08 06:13 AM lol sorry I didn't read your sig. I was wondering why you didn't mention the 236rwkw readout Link to comment https://www.fordxr6turbo.com/forum/topic/45337-had-dyno-reading-today/#findComment-673485 Share on other sites More sharing options...
XR06T Silver Donating Members 4,146 Member For: 19y 10m 9d Gender: Male Posted 09/05/08 07:58 AM Share Posted 09/05/08 07:58 AM cars have been known to hop off the rollers and if you are in front of them you get run down. a youtube search should come up with some results for hopping off the rollers Link to comment https://www.fordxr6turbo.com/forum/topic/45337-had-dyno-reading-today/#findComment-673540 Share on other sites More sharing options...
Maximus Member 1,627 Member For: 18y 1m 21d Gender: Male Location: Slip Sliding Away Posted 09/05/08 08:57 AM Share Posted 09/05/08 08:57 AM 4. Bit of advice, 'Do not stand in front of the car'..... - Sounds like there is a story behind this comment. Care to share?L-8xqD-Uaq8 Lj0-_K_RsmA NEVER STAND INFRONT OF A CAR ON A DYNO Link to comment https://www.fordxr6turbo.com/forum/topic/45337-had-dyno-reading-today/#findComment-673594 Share on other sites More sharing options...
Fat-Tony Member 5,364 Member For: 19y 1m 11d Posted 09/05/08 09:03 AM Share Posted 09/05/08 09:03 AM (edited) I have had my car come off the dyno. Meh sh*t happens and glad the operator was quick enough to control it before any damage happened. Yeah no one was standing in front. Common sense really, unless the workshop has insurance. Might get a few weeks off work and a payout Edited 09/05/08 09:16 AM by Fatsex Link to comment https://www.fordxr6turbo.com/forum/topic/45337-had-dyno-reading-today/#findComment-673596 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now