Jump to content

Awd Typhoon


F6 R Spec

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

  • My new toy
  • Lifetime Members
  • Member For: 21y 7m 19d
  • Gender: Male
  • Location: stanthorpe wine capital of qld.

if you are talking the rtv falcon ute it is not 4x4 drive it is just a riased up falcon ute with a hydro torque rear diff.

Ian

Link to comment
Share on other sites

  • 1 year later...
  • Member
  • Member For: 19y 5m 5d
  • Gender: Male
  • Location: Perth

Main problem of fitting the Territory AWD to a Falcon would be the ride height, and the floor pan modification needed where the transfer case sits. The Territory looks like it sits approx 50 mm above a Falcon.

I recon a complete front suspension off Territory would be needed, but with maximum lowering to bring it down to Falcon looks. This could affect the front driveshafts.

Falcon and Territory obviously have the same frame rails, the same firewall, quite similar floor pan, but differences in the centre tunnel where the transfer case is located. Welding in a piece of Territory Floorpan into a Falcon would probably be possible. The front end frame rails are the same, only stud location is different, and these can be moved.

I own a BA XR6 that it would be interesting to convert to AWD, as it is going to get a turbo conversion soon, however the ride height is my main consern. Wouldn't look good if it has to sit 50 mm. above standard falcon..hehe..

I also own a BA RTV Ute. As mentioned above a lot of people think these are 4x4, but as mentioned they all were only RWD with a diff lock. I recon the RTV would be very easy to convert to a Territory AWD front suspension, as the RTV already have the raised ride height needed. Only the floor pan job to do, move the front rail studs, and the rest should bolt in. Unfortunately, the value would hardly go up, and spending all that effort on a $10k vehicle is not really worth it.

Link to comment
Share on other sites

  • Member
  • Member For: 19y 4m 22d
  • Gender: Male
  • Location: Perth

I had a close look at the front diff set-up and as it stands, there is about 25mm between the front driveshaft tube and the sump. Biggest obstacle is the angle at which the front driveshaft leaves the transfer box as this determines the position of the front diff in relation to the motor. If you could get the front diff right inside the sump, a la GTR Nissan, you're some way there to getting the package to sit under a Falcon floorpan. Huge engineering effort required, along with an equally sizeable helping of commitment to get this off the ground, but certainly not impossible. I have access to all the parts to make it happen, but damn, its still a monster project..

Or you could wait for the AWD Taurus due in 2015 or so..

Mal K

Link to comment
Share on other sites

  • Member
  • Member For: 19y 4m 22d
  • Gender: Male
  • Location: Perth

Face the facts, for its going to eventually be the next Falcon.. and from all accounts will fill in nicely when out Territory Turbo gets too long in the tooth. Lots of room and a twin turbo V6 with lots of tuning potential. That or possibly an Audi Q7..

Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 17y 16d
  • Gender: Male
  • Location: Probably above atmospheric pressure

Mustang global RWD, save me!

Link to comment
Share on other sites

  • Member
  • Member For: 19y 4m 22d
  • Gender: Male
  • Location: Perth

Sadly the Mustang platform isnt remotely as refined as FG.. it will come down to a global platform unfortunately.. Here in Oz we are just small fish from a global manufacturing perspective and the tiny volumes we build and consume are a drop in the ocean when compared to overall production numbers.. Crown Victoria anyone?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'