Jump to content

Mph Vs Rwkw List


JP300

Recommended Posts

  • Member
  • Member For: 18y 1m 18d
  • Gender: Male
  • Location: Melbourne

bradles, not real sure mate.. my car only has 3.45 diff gears cos it was an auto before, so that probably has an effect.

it also comes onto boost a bit slow so maybe its similar power to yours but alot more up top?

Link to comment
Share on other sites

  • All round good guy!
  • Lifetime Members
  • Member For: 16y 7m 16d
  • Gender: Male
  • Location: Greenvale, Victoria

12.7, 60 ft of 2.527, @ 122.34 MPH /196.9KMph with 372 rwkw, street tyres, spare tyre, jack and a full tank of 98ron.

The video shows my take off like I was leaving the drive through at Maccas ith the kids in the car.

Link to comment
Share on other sites

  • Member
  • Member For: 15y 11m 20d
  • Gender: Male
  • Location: Albury/Wodonga

I haven't run my T down the strip yet, have been bit reluctant to as of hot ambient temps in Darwin. But effictively if I drive it half decent, nail shifts and dyno figure of 342rwkw is correct. Going of some posts in here, I should be able to run at least 12.0secs right?

Link to comment
Share on other sites

  • Suspended
  • Member For: 16y 4m 26d
  • Gender: Male

12.43 @ 118mph 1.999 60ft

t56, 18inch nanakangs, 1900kg ute

ute has been dynoed first at 338kw @ 12.5psi then 285kw@13-14psi last time I had changed fuel pump so runs heaps rich, low 10 afrs

I just wind the boost up to 16-18psi at the track;)

intake temps are usualy 50-60deg when sitting in staging lanes that's what kills the power usualy run high 12s the few times I have down mid 12s was when had a good 60footer and had been a oil down/crash and car had time to cool down

dynos are for posers

Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'