.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 8m 15d Gender: Male Location: Perth Posted 19/03/16 08:29 AM Share Posted 19/03/16 08:29 AM You're not missing much Kimbo... Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,998 Member For: 16y 7m 18d Gender: Male Location: Melbourne Posted 19/03/16 08:33 AM Share Posted 19/03/16 08:33 AM This thread has a bug that sometimes that the last page has a link but nothing in it. Link to comment Share on other sites More sharing options...
Kimberley Scott www.australianflag.org.au Donating Members 6,763 Member For: 19y 4m 11d Gender: Male Location: Brisbane Posted 19/03/16 09:27 AM Share Posted 19/03/16 09:27 AM Who else is having sex tomorrow night? 2 Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 9m 2d Gender: Male Location: Perth Posted 19/03/16 09:40 AM Share Posted 19/03/16 09:40 AM Yeah didn't wanna start a new thread and the bloody "known issues fg xr6t" thread is still stuffed . Car is still acting weird. Now the rpms aren't consistent with throttle input. They are sticking instead of dropping back down smoothly after letting off the throttle. For example when I press the pedal really quick and let off, the needle will jump to 3k and hold there. What'd you do to the throttle body? Maybe you f*cked it and the butterflies getting stuck now or something Link to comment Share on other sites More sharing options...
GKGSJQKS Banned 259 Member For: 9y 5m 11d Gender: Not Telling Posted 19/03/16 10:32 AM Share Posted 19/03/16 10:32 AM 46 minutes ago, Lennox said: What'd you do to the throttle body? Maybe you f*cked it and the butterflies getting stuck now or something I just cleaned it out, but I was holding it open manually, not by having the pedal pushed down. Would that have done anything bad? Apart from that I pulled the MAP sensor out and sprayed it with electrical cleaner. Put everything back together and there have been no codes showing, but the rpms are f*cked as described above. Also when I'm parked and I push the throttle, the rpm goes up then comes back down just above idle and gets stuck there for a couple of seconds, then drops to idle. Seems like there is a delay from the initial input too. It's doing my head in. Link to comment Share on other sites More sharing options...
Mrs Jeturbo Bob the Freaking Builder Donating Members 10,813 Member For: 15y 2m 15d Gender: Female Location: SA Posted 19/03/16 10:47 AM Share Posted 19/03/16 10:47 AM shakalaka ? boom shake the room ? Its boom shake shake shake the room Ffs keith Sent from my SM-G935F using Tapatalk 2 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,998 Member For: 16y 7m 18d Gender: Male Location: Melbourne Posted 19/03/16 11:20 AM Share Posted 19/03/16 11:20 AM My bad Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 8m 15d Gender: Male Location: Perth Posted 19/03/16 12:38 PM Share Posted 19/03/16 12:38 PM Loooool Fluff! 1 Link to comment Share on other sites More sharing options...
stubbietubbie Filthy weeb Member 1,870 Member For: 11y 9m 12d Gender: Male Posted 19/03/16 01:38 PM Share Posted 19/03/16 01:38 PM Yeah, correct him on a horrible, horrible song. gg. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 5d Gender: Male Location: Perth Posted 19/03/16 01:52 PM Share Posted 19/03/16 01:52 PM 3 hours ago, kokentoe said: I just cleaned it out, but I was holding it open manually, not by having the pedal pushed down. Would that have done anything bad? Apart from that I pulled the MAP sensor out and sprayed it with electrical cleaner. Put everything back together and there have been no codes showing, but the rpms are f*cked as described above. Also when I'm parked and I push the throttle, the rpm goes up then comes back down just above idle and gets stuck there for a couple of seconds, then drops to idle. Seems like there is a delay from the initial input too. It's doing my head in. Air leaking past the oring on the tmap. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now