R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 2m 7d Gender: Male Location: Melbourne Posted 01/04/08 03:09 AM Share Posted 01/04/08 03:09 AM If I put a small pod straight on the turbo inlet (just for noise, not performance!) will it screw anything up not having any pipe or anything coming off it? It's only for short periods of time only.Thanks! Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 11m 30d Gender: Male Location: SW Sydney Posted 01/04/08 03:19 AM Share Posted 01/04/08 03:19 AM I wouldn't bother mate, it would be a very small pod to fit down in there, then you would have to block off the normal inlet. With the amount of heat around that area I reckon you would lose performance Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 2m 7d Gender: Male Location: Melbourne Posted 01/04/08 03:44 AM Author Share Posted 01/04/08 03:44 AM I found this tiny 'DRIFT' pod down at Autobarn. It's just for noise. I'll give it a go and post the vid.Cheers! Link to comment Share on other sites More sharing options...
XF Falcon <put funny sh*t here> Member 3,365 Member For: 18y 2m 28d Gender: Male Location: Perth, NOR Posted 01/04/08 03:45 AM Share Posted 01/04/08 03:45 AM Imagine the sweet ass tie-fighter sounds the intake would make as you fly down the street though make sure you record the sound if you do it Link to comment Share on other sites More sharing options...
exarsixturbo Dr. Speed Member 784 Member For: 17y 6m 5d Gender: Male Location: The land of Politicians, Public Servants, Porno & Pyrotechnics Posted 01/04/08 03:49 AM Share Posted 01/04/08 03:49 AM I have a 30 cm pipe direct off my turbo connected to a pod which is inside an air box. The induction noise is crazy! The turbo noise is so cool on WOT! Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 11m 30d Gender: Male Location: SW Sydney Posted 01/04/08 03:52 AM Share Posted 01/04/08 03:52 AM I agree the pod is cool - I have one of RAP1DS intakes!I trial fitted my pod to the mouth of my turbo and it wasn't the length, but rather the width that fouled the placement Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 2m 7d Gender: Male Location: Melbourne Posted 01/04/08 04:07 AM Author Share Posted 01/04/08 04:07 AM I tried it and it sounded like a rattle snake. The turbo noise was heaps louder though.Can you hook up a dose pipe to stock piping? Anyone got any pics? Link to comment Share on other sites More sharing options...
YPURV4 KILL,KILL,KILL,DIE,DIE,DIE, Member 2,813 Member For: 18y 9m 2d Gender: Male Posted 01/04/08 04:15 AM Share Posted 01/04/08 04:15 AM I tried it and it sounded like a rattle snake. The turbo noise was heaps louder though.Can you hook up a dose pipe to stock piping? Anyone got any pics?Mate I run a dose pipe and its fcking crazy, but you cant get one in there with the factory setup.To get the best dose you need a 90 deg bend straight off the turbo. Link to comment Share on other sites More sharing options...
PURVIE Sexy Member Donating Members 524 Member For: 18y 1m 27d Gender: Male Location: Berwick, VIC Posted 01/04/08 04:15 AM Share Posted 01/04/08 04:15 AM James buddy, you can fit a 90 dgree dose pipe but its a very tight fit, but I dont understand what you mean by using stock piping? Dose pipes are only short tubes of metal with a pod filter attached, if you wanted to keep this permanently, for neatness purposes you would get rid of the airbox and run a pipe from the cooler straight to the plenum. Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 19y 2m 7d Gender: Male Location: Melbourne Posted 01/04/08 04:17 AM Author Share Posted 01/04/08 04:17 AM Sorry, I meant with the stock cold side cooler piping.Does anyone have a pic of a 90° dose pipe?Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now