mic Donating Members 1,725 Member For: 16y 11m 9d Gender: Male Posted 29/03/08 10:30 AM Share Posted 29/03/08 10:30 AM Just put 3 inch hot side piping on. Was so big that I had 2 put it under the cross member instead of over. And no it does not hit on gutters or anything. 3 inch all the way. Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 10m 20d Gender: Male Location: SW Sydney Posted 29/03/08 10:43 PM Share Posted 29/03/08 10:43 PM tasty - noticable difference? Link to comment Share on other sites More sharing options...
mbjunior99 Member 4,359 Member For: 22y 5d Gender: Male Location: Brisbane Posted 30/03/08 03:22 AM Share Posted 30/03/08 03:22 AM That's nice big pipework! Link to comment Share on other sites More sharing options...
mic Donating Members 1,725 Member For: 16y 11m 9d Gender: Male Posted 30/03/08 08:55 AM Author Share Posted 30/03/08 08:55 AM Thanx guys. It makes a difference but not much until my tune. Im gettin all this done b4 and its the last thing ! woo hoo ! But I just changed it as I was not satisfied, and found a much better route. Check this out. Link to comment Share on other sites More sharing options...
mic Donating Members 1,725 Member For: 16y 11m 9d Gender: Male Posted 30/03/08 09:05 AM Author Share Posted 30/03/08 09:05 AM N this Link to comment Share on other sites More sharing options...
YPURV4 KILL,KILL,KILL,DIE,DIE,DIE, Member 2,813 Member For: 18y 7m 24d Gender: Male Posted 30/03/08 09:12 AM Share Posted 30/03/08 09:12 AM Looks pretty close to the ground, watch out for speed bumps. Link to comment Share on other sites More sharing options...
BFHOON Donating Members 1,932 Member For: 18y 9m 3d Gender: Male Location: nsw Posted 30/03/08 09:17 AM Share Posted 30/03/08 09:17 AM its a good idea having the silicone bend off the turbo, if u hit a speed bump it wont snap your turbo off.I agree with the others , its a bit low. but as it is now its a lot more direct than the u turn bends I have. Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 9m 4d Gender: Male Location: perth w.a Posted 30/03/08 09:21 AM Share Posted 30/03/08 09:21 AM you wouldn't want to accidently mount a kerb with that, looks the good thought I'm sure it will make a huge differenceturboknapp Link to comment Share on other sites More sharing options...
Tree Monkey Member 685 Member For: 17y 18d Gender: Male Location: brisvagas / Manly Posted 30/03/08 09:38 AM Share Posted 30/03/08 09:38 AM has anyone thought of rotating the compressor housing so that it points up and then run the hot side under the headlightthe same as the ubp goes. It seems that all the intercooler mods dont think of running this way, cos it is to hard to get an intercooler with offset end tanks. Link to comment Share on other sites More sharing options...
mic Donating Members 1,725 Member For: 16y 11m 9d Gender: Male Posted 30/03/08 09:43 AM Author Share Posted 30/03/08 09:43 AM Cheers guys. Its really not that low, its the same as my cat. First setup I posted was low. Just went out and was safe over everything, nowhere near scraping. Its real hard trying to get anything over the cross mem. Even the standard 2 inch pipe has sort of a chunk out of it 2 fit through. There is really no where else to go with big pipes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now