Jump to content

Venting The Stock Bov


Dillz

Recommended Posts

  • Member
  • Member For: 13y 6m 7d

hey fellas, going to do this tomorrow to my BA xr6t, but im more keen on the stututu noise instead of psshhhhhh. what else is needed to get the sttututu noise. I have the typhoon intake, KnN panel filter.

Edited by XR6T-Shane
Link to comment
Share on other sites

  • 3 weeks later...
  • Member
  • Member For: 13y 4m 18d

I have vented the stock bov. car is stock and auto, only time I hear a pssshhh sound is when I hit boost then back off throttle. which is good. I do notice while at idle I feel air escaping out of the filter I attached to bov...do these stock bov leak abit at idle?

Link to comment
Share on other sites

  • Menace
  • Donating Members
  • Member For: 13y 7m 2d
  • Gender: Male
  • Location: Sydney

Doesn't sound like it, can you post up a pick?

This mod has almost become obsolete now that you can buy the knockoff turbosmart kompacts for $60.

Where from?

Link to comment
Share on other sites

  • Three pedals are better then two..
  • Donating Members
  • Member For: 17y 5m 28d
  • Gender: Male
  • Location: Melbourne

THIS is the one I bought mate, sold out unfortunately. Pretty good quality for the price.

Link to comment
Share on other sites

  • 2 weeks later...
  • Donating Members
  • Member For: 21y 4m 9d
  • Location: Melbourne

Is there any impact on performance (either positive or negative) when venting to atmo?

I would have thought that returning the air back into the manifold during a gear change, will help to build boost quicker in the next gear?

By the way I just did this on my FG F6, and the best way to get "tututu" is to drill a 10mm hole into the rubber stopper which is to be attached to factory BOV.

Do we have an emoticon that represents "tututu"? :spoton:

// Jake.

Link to comment
Share on other sites

  • Three pedals are better then two..
  • Donating Members
  • Member For: 17y 5m 28d
  • Gender: Male
  • Location: Melbourne

Have you tried blocking it fully? Use to think that too mate, have done both on mine but I swear it runs way better with a full blocked bov (and is louder) then with the hole drilled in it. Have no idea why but that's just my experience. Someone explained it in this thread I think.

Not really any positive in performance for an auto but atmo bovs are designed to keep boost up during gear changes on a manual cars so if there was to be any benefit it would be in that scenario.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 21y 4m 9d
  • Location: Melbourne

Haven't tried to have it fully blocked. I might try that tommorow.

I don't understand how venting to atmo would help to keep boost up, I thought that it would actually release boost, whereas venting into the manifold would "recycle" air and hence keep boost up ???

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'