mar705 Member 67 Member For: 14y 1m 8d Gender: Male Location: brisbane Posted 22/01/11 02:08 PM Share Posted 22/01/11 02:08 PM what way did u try the mini filter or hole in a plug Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 5m 28d Gender: Male Location: Melbourne Posted 22/01/11 02:18 PM Author Share Posted 22/01/11 02:18 PM Hole in plug (which I think I invented back in the day didn't I, lol), pretty sure it was too small to do anything (3-5mm) so basically fully blocked. But I think FG's run like 3 to 5 pound more boost then a stock Ba so will make a big difference on noise. Link to comment Share on other sites More sharing options...
mar705 Member 67 Member For: 14y 1m 8d Gender: Male Location: brisbane Posted 22/01/11 02:39 PM Share Posted 22/01/11 02:39 PM yeah should try the way I posted with the brass might try make a copper trumpet tomorrow with a filter inside so nothing can go back down Link to comment Share on other sites More sharing options...
kris Donating Members 94 Member For: 14y 6m 4d Gender: Male Location: melb Posted 01/02/11 01:06 AM Share Posted 01/02/11 01:06 AM (edited) just did this mod to the fg.. not bad for $15. like the dump sound probably more than blocking everything off... 1x 25mm monza air breather- $15.. 1x bunnings door stop- $1.. 3x stainless steel screw clamps- priceless Edited 01/02/11 01:10 AM by kris Link to comment Share on other sites More sharing options...
marcthelegend Member 32 Member For: 17y 8m 12d Gender: Male Location: Perth, WA Posted 23/02/11 10:13 AM Share Posted 23/02/11 10:13 AM Just did this on my FG. Was extremely easy to do and took less that 10 minutes and around 8 dollars, basically all I did was cut the factory pipe (going from BOV to crossover) in the middle and on the intake side I put a 25mm poly pipe stopper on (with a hose clamp).On the turbo side, I did the same think but drilled a 4mm hole in the end of the stopper and again fastened with a hose clamp.While looking through the shed I noticed I had more polypipe stoppers and decided to make 2 more.Stopper 1 - 4mm hole .. makes a nice sch tutututututut sound.Stopper 2 - 8mm hole .. makes a schhh sound as well as tutututu sound (both in sync)Stopper 3 - 13mm hole .. makes a schhhhhhhhhhhhhhhhhhhhhhh sound .. which seems to go for ages!My favourite one would have to be the 8mm hole one, I find myself dropping the throttle a bit more to get the sound but it sounds sweet, havent got any pics as of yet, but it really takes only 2 minutes of time to change from one to the other Hope this inspires someone else Marc Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 5m 28d Gender: Male Location: Melbourne Posted 24/02/11 08:33 AM Author Share Posted 24/02/11 08:33 AM Good post mate, the Tutututu sound is compressor surge, nothing to do with the bov as a fully blocked bov makes the same sound.Not sure why the stock bov just makes the schhhhhhhhhhhhhhhhhhhhhhh sound when fully vented rather then the high pitched Paaachhh (rex style) sound. Maybe a trumpet on the end makes a difference or just a harder spring?? that's the sound I'm chasing anyway, on a G6 would be piss funny I think. Link to comment Share on other sites More sharing options...
cruze Member 91 Member For: 17y 4m 6d Gender: Male Location: Northshore N.S.W Posted 28/03/11 12:50 AM Share Posted 28/03/11 12:50 AM What size is the stock BOV in the FG ? Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 5m 28d Gender: Male Location: Melbourne Posted 28/03/11 01:32 AM Author Share Posted 28/03/11 01:32 AM 34mm Mate. Link to comment Share on other sites More sharing options...
cruze Member 91 Member For: 17y 4m 6d Gender: Male Location: Northshore N.S.W Posted 28/03/11 01:36 AM Share Posted 28/03/11 01:36 AM What is required to change from the Stock BOV to another ?Looking at either a Turbosmart or Plazmaman. Link to comment Share on other sites More sharing options...
wados Member 617 Member For: 20y 1m 6d Gender: Male Location: brisbane Posted 31/03/11 12:17 PM Share Posted 31/03/11 12:17 PM Good post mate, the Tutututu sound is compressor surge, nothing to do with the bov as a fully blocked bov makes the same sound.Not sure why the stock bov just makes the schhhhhhhhhhhhhhhhhhhhhhh sound when fully vented rather then the high pitched Paaachhh (rex style) sound. Maybe a trumpet on the end makes a difference or just a harder spring?? that's the sound I'm chasing anyway, on a G6 would be piss funny I think.the HKS bov will give you this sound and still be legal as it is a recirculation BOV Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now