daggo Member 44 Member For: 16y 10m 19d Gender: Male Location: perth wa Posted 24/03/08 10:47 AM Share Posted 24/03/08 10:47 AM just wondering if anyone has used/still using this cam and if it is worth gettting it or not I am all about taking stress away from the turbo.Standard Ford BA 6 cyl valve timing:Advertised Inlet duration - 251 degreesAdvertised Exhaust duration - 251 degreesDuration at .050" lift - 173.5 degreesLobe lift - inlet and exhaust - .212"Valve lift - inlet and exhaust - .432"Atomic #306550 valve timing:Advertised Inlet duration - 257 degreesAdvertised Exhaust duration - 257 degreesDuration at .050" lift - 196 degreesLobe lift - inlet and exhaust - .223"Valve lift - inlet and exhaust - .453" Link to comment Share on other sites More sharing options...
DAWSEY Member 441 Member For: 19y 10d Gender: Male Posted 24/03/08 11:19 PM Share Posted 24/03/08 11:19 PM I run these cams in a built motor....could not be happier with them...I am not 100%sure how much power I got out of them as I did alot of work at once. but I do know that it is very smooth and good midrange power over the standard built motor. Link to comment Share on other sites More sharing options...
DUS12 Member 471 Member For: 17y 5m 15d Posted 25/03/08 01:45 AM Share Posted 25/03/08 01:45 AM I run these cams to im also happy with them, we played around with my idle and now it sounds tuff as nails ha ha Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 22d Gender: Male Location: Canning Vale, W.A Posted 25/03/08 02:14 AM Share Posted 25/03/08 02:14 AM Any chance of a sound clip?I wanna hear a xr6t with cams as I have a set waiting to go in. Link to comment Share on other sites More sharing options...
INFLYT Donating Members 784 Member For: 18y 5m 10d Gender: Male Location: N.S.W, Sydney Posted 25/03/08 04:09 AM Share Posted 25/03/08 04:09 AM It would be quite interesting to see a back to back comparison, before and after, with these Camshaft's. There's alot more of these car's nowaday's making 400+ rear wheel kilowatts, and a set of Cam's could make a reasonable upgrade here in power, for the dollar's spent. Maybe Atomic could come to the party and show some before and after result's? Link to comment Share on other sites More sharing options...
daggo Member 44 Member For: 16y 10m 19d Gender: Male Location: perth wa Posted 25/03/08 01:08 PM Author Share Posted 25/03/08 01:08 PM yer spoke to the guys and they rekon 30 - 40kw upgrade at same psi Link to comment Share on other sites More sharing options...
INFLYT Donating Members 784 Member For: 18y 5m 10d Gender: Male Location: N.S.W, Sydney Posted 25/03/08 02:02 PM Share Posted 25/03/08 02:02 PM If you could even get 10 kilowatts at the wheel's from fitting them to a "400+" set up, you'd have to be pretty happy, considering how expensive it get's to make more power from there. I think they were somewhere around the $1000 mark supplied for the Atomic's, plus I'd guesstimate another say $500 (!?) to have them fitted and have your Tune "touched up" to suit. Good value. Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 22d Gender: Male Location: Canning Vale, W.A Posted 25/03/08 09:52 PM Share Posted 25/03/08 09:52 PM I think they're actually around 1400$(700 a cam)Don't quote me on it though. Link to comment Share on other sites More sharing options...
INFLYT Donating Members 784 Member For: 18y 5m 10d Gender: Male Location: N.S.W, Sydney Posted 26/03/08 03:51 AM Share Posted 26/03/08 03:51 AM If they are infact that much, then I can see why they're not popular. Link to comment Share on other sites More sharing options...
daggo Member 44 Member For: 16y 10m 19d Gender: Male Location: perth wa Posted 26/03/08 06:47 AM Author Share Posted 26/03/08 06:47 AM they are $500 each $1050 for both of emm and yer around $500 to install unless you get emm done same time as a rebuild like I am much cheaper in labour Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now