nxr06 Donating Members 117 Member For: 20y 6m 17d Posted 08/05/17 12:14 AM Share Posted 08/05/17 12:14 AM Anyone else had to shim the atomic cams? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 13d Gender: Male Location: Adelaide Posted 08/05/17 01:19 AM Share Posted 08/05/17 01:19 AM All depends on what spec cam you're talking about Link to comment Share on other sites More sharing options...
nxr06 Donating Members 117 Member For: 20y 6m 17d Posted 15/05/17 02:51 AM Share Posted 15/05/17 02:51 AM Atomic Stage 4 Plus..... It had washes not shims in there when supplied with the long motor, but when the engine was hot I'm guessing that it may have kept a valve or 2 open as it would wind over and not start like it had minimal compression, and be find again once it cooled down. I removed the washes which did seem to make the engine much better hot and cold starting, so now im assuming I should by a shim kit and do them properly. I just assumed the standard roller base circle would still have been like stock, but maybe not. FTR: I had the vernier gears in, as supplied and changed back out to full VCT functionality which is where it is at now Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now