Buyin A Trans Cooler

[Mattttty]

hey im going to buy a transmission cooler of ebay do u think its any good http://cgi.ebay.com.au/automatic-transmiss...1QQcmdZViewItem

what oil do u use to top up the auto and how do u do it any help would be good

thanks

[BAman]

That's the one I'm using, it's great and has a PWR Transmission Oil Cooler ( 280 x 255 x 19mm )

Mine runs in series with the radiator as all the fitting are there.

My one is sitting behind the drivers side spot light.

The kit is made up by swan transmissions so it's not a back yarder.

[Fry]

exact same kit I'm running, perfect if ya can't be bothered tryin to find all the fittings for other coolers,

I got a auto service straight after I put it on which filled up to right level,

[hanra]

Im using a PWR heavy duty one. Running it by itself, have bypassed the factory trans cooler.

[Mattttty]

hey ill grab that 1 then so do any of u know what oil and how to top it up

[BAman]

Use Castrol TQ 95 Automatic Transmission Fluid , it's the only OEM approved fluid for BTR Transmission

There's a filler plug on the drivers side, side of the gearbox, remove the plug and don't forget to check the O-ring for any damage.

The correct fluid level is reached when the Automatic Transmission Fluid is level with the bottom of the filler hole.

[private9]

That's the exact kit I'm running - the same PWR kit can be found for about $50 less at Supercheap etc.

I bypassed my radiator, and as I couldn't be stuffed getting under the car to top up the trans, I simply filled the cooler with fluid before I popped it in. From memory the cooler took over half a litre.