F6 UTE - Track Bound EVO III - Member 3,367 Member For: 20y 1m 5d Gender: Male Location: Strapped in and holding on Posted 05/05/11 12:32 PM Author Share Posted 05/05/11 12:32 PM ^^ Yep - and they'll go hungry if they line up next to me!!Remember, mine goes round the track just as fast, in exactly the same spec (inc tyres) as it runs the 1/4.. MT's or slicks aint too good round corners Mine though, is a dedicated track car you can't take to the shop....Here's the reason the ET wasn't as 'good' s it probably could have been (relative to mph).The average 60' was a result of my gumby 1-2 shift...... It looks a bit shonk on the vid but Performance box shows it cost a bit of time.. Link to comment Share on other sites More sharing options...
Guest newl Guests Posted 06/05/11 12:20 AM Share Posted 06/05/11 12:20 AM Gumby shift? That's not like you. You could peddle the F6 like nobodies business!It has to be a great feeling to see your hard work pay off mate. Well done Ben. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 29d Gender: Male Location: Perth Posted 06/05/11 12:34 AM Share Posted 06/05/11 12:34 AM Nice one Ben! Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 20y 1m 5d Gender: Male Location: Strapped in and holding on Posted 06/05/11 04:14 AM Author Share Posted 06/05/11 04:14 AM Gumby shift? That's not like you. You could peddle the F6 like nobodies business!It has to be a great feeling to see your hard work pay off mate. Well done Ben.haha.But the ole F6 never went from launch to redline, while turning all 4 in a blink either.. Bit harder to grapple the launch, wheelspin, gearchange and rev limmiter in 0.8 of a second !! Anyone who thinks an awd is easy and foolproof to launch (or drive for that matter) hasn't driven one with grunt I have some telemetary overlaid onto the video, it really magnifies how quick it gets up and how slow I am to get it going again.. Will try and post up over the wkend.. And yeah, with the help of others like Toad who is willing to come over and help when I tuned it, then stand around in the cold with a camera to capture two runs it makes it all worthwhile.. I've had mates help with teething problems, engine building advice, problem solving etc and it's all helped.. Most of the take the p!ss and shake their head at the old rice cooker but she's speaking for herself now .. Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 2m 26d Gender: Male Location: Far north queensland Posted 06/05/11 07:24 AM Share Posted 06/05/11 07:24 AM on the vid vs the xr6t, just as you were about to cross the line did you dump a heap of fuel into her? Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 20y 1m 5d Gender: Male Location: Strapped in and holding on Posted 06/05/11 12:00 PM Author Share Posted 06/05/11 12:00 PM Rev limmiter is set to cut spark and keep fuel into it Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 20y 1m 5d Gender: Male Location: Strapped in and holding on Posted 06/05/11 01:11 PM Author Share Posted 06/05/11 01:11 PM Dodgey telemetry screen capture Linky Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 20y 1m 5d Gender: Male Location: Strapped in and holding on Posted 04/10/11 04:01 AM Author Share Posted 04/10/11 04:01 AM Had her on the dyno last week to see what the tune is looking like. Turns out it's pretty good! Small dip at 6300rpm, would have been good to lift that up but I didn't attempt it considering I was stoked anyway....About out of injector, running 90+% IDC's from 6k rpm up (90Lb / 950cc injectors).. Also looks like a flow restriction above 6krpm or so, might be my stock 2 1/4" intercooler piping..280 kw @ all 4 wheels, which equates to 350kw @ the fly (concervative) from 2.0L in something that weighs 1100kg...Still has stock:head, manifolds, intercooler & piping Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 2m 26d Gender: Male Location: Far north queensland Posted 04/10/11 05:30 AM Share Posted 04/10/11 05:30 AM Stock cooler and piping - that's awesome Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now