neilandjoanne Member 2 Member For: 11y 7m 24d Gender: Male Location: Brisbane Posted 24/03/14 10:49 AM Share Posted 24/03/14 10:49 AM I was considering buying a Turbo smart 7/12PSI Actuator. I notice you guys are all talking about porting to a larger diameter.Question 1. Do you have to enlarge the Waste Gate Port/Flapper or can you fit the new Actuator only to make some gains without operating?Question 2. If you do change the actuator to 7 or 12 PSI do you need to have tuned or will it run OK?I currently have a SCT 14 PSI Tune from Intune.Question 3. With a stock Actuator as I have now, how does the 14 PSI come into it? when I read the stock actuators pop off at 5 PSI.Question 4. My 14 PSI tune has made a considerable difference in low down torque off the line, Pardon my ignorance but what is actually 14PSI? Link to comment Share on other sites More sharing options...
bjacobs Member 143 Member For: 11y 1m 8d Gender: Male Posted 03/07/14 10:52 PM Share Posted 03/07/14 10:52 PM Has anyone had their turbo ported, flapper and actuator mod done by CMS? If so are you happy with the results? I'm trying to decide weather to get it done by them or get it done by Garrett which is more of a stuff around. So if people are happy with CMS porting jobs is prefer to just get the to do it.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
az6 turbo Member 38 Member For: 12y 11m 28d Gender: Male Location: shellharbour Posted 04/07/14 12:30 AM Share Posted 04/07/14 12:30 AM Mines been done by cms, no issues. Are they going to tune the car? Just asking because if you get the flapper/port job at 'x' shop, go to 'y' shop for a tune and then have a boost control issue who's fault is it? tuners or port/flappers job. Best to keep it all in one shop, and can't speak highly enough of cms like a lot of people on hear. 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 29d Gender: Male Location: Adelaide Posted 04/07/14 12:57 AM Share Posted 04/07/14 12:57 AM ^^^ this ^^^ Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 7m 26d Gender: Male Location: Central Coast Posted 04/07/14 01:20 AM Share Posted 04/07/14 01:20 AM My one is done by them (although they outsource it to precision turbo wetherill park)No complaints here They put together my billet wheel 3540 as well Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 29d Gender: Male Location: Adelaide Posted 04/07/14 01:22 AM Share Posted 04/07/14 01:22 AM Its funny how skids in my jocks told a great story but forgot to mention how it buggered up and had to pay to get it done correctly LoL Link to comment Share on other sites More sharing options...
bjacobs Member 143 Member For: 11y 1m 8d Gender: Male Posted 04/07/14 01:38 AM Share Posted 04/07/14 01:38 AM Yeh I've spoken to autotech and CMS and I think I'm going to go with CMS for my tuner for this car so from those comments I'm happy to get them to port it while it's there, easier for me as well. And az6 you make a good point as well, better to get one shop to do everything so if there's issues they know what they've done. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 4m 20d Gender: Male Posted 04/07/14 01:54 PM Share Posted 04/07/14 01:54 PM (edited) Won't be disappointed. Great choice! Joe knows he's falcons! Just tell him to smash tha b00st Edited 04/07/14 01:55 PM by Kosij 2 Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 7m 3d Gender: Male Location: @ my laptop Posted 04/07/14 11:57 PM Share Posted 04/07/14 11:57 PM (edited) port job is not important then Edited 04/07/14 11:59 PM by ratter 1 Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 7m 19d Gender: Male Location: Gold Coast Posted 02/09/14 10:25 AM Share Posted 02/09/14 10:25 AM (edited) Out of interest, when at full stroke how much does the flap lift off its seat? Edited 02/09/14 10:25 AM by Bomber Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now