Focused Member 10 Member For: 16y 8m 13d Gender: Male Location: Adelaide Posted 13/03/08 03:12 AM Share Posted 13/03/08 03:12 AM (edited) Hey all.New to the forum. 2 weeks ago got myself a 2003 BA XR6T 5 Speed with 48,000ks on the clock in blue print im for SA. This is my second falcon but 1st Turbo. Love the car and just dont know where to start when it comes to modding. Reading most the posts on here every1s done different things. I dont want to go crazy with mods but I would like to slowly build up a good amount of power.I would like to get a flash tune firstly but at the same time will I need to do my injectors?ThanksRyan Edited 13/03/08 03:13 AM by Focused Link to comment Share on other sites More sharing options...
exarsixturbo Dr. Speed Member 784 Member For: 17y 3m 5d Gender: Male Location: The land of Politicians, Public Servants, Porno & Pyrotechnics Posted 13/03/08 03:21 AM Share Posted 13/03/08 03:21 AM Have a read through the posts on here. Most will include a mods list like this one:Editinjectorsvalve springscatcooleractuatorfuel pumpIf you get to this point you will no doubt be needed a clutch rebuilding you 5 speedNew tyres!Have fun! Link to comment Share on other sites More sharing options...
R-SPEC You are a dead set goose Silver Donating Members 3,968 Member For: 18y 11m 6d Gender: Male Location: Melbourne Posted 13/03/08 03:39 AM Share Posted 13/03/08 03:39 AM (edited) :hiwelcome: Read through the sponsors and find your local ones, then check out their websites for some more info on tuning packages.Definately the first 3 are what you would do initially (injectors, valve springs and a custom tune (edit). This should give you around about 300rwkw I think.Then when you get used to that power, save up and do the others. Bare in mind, every time you do one of the bigger ones, eg. cooler, cat, actuator etc, you'll need to get it tuned again, which ads to the cost.Good Luck! Edited 13/03/08 03:39 AM by R-SPEC Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 8m 29d Gender: Male Location: SW Sydney Posted 13/03/08 03:44 AM Share Posted 13/03/08 03:44 AM :hiwelcome: there is alot to read here mate - but its all good information (well, there is alot of crap too!) Link to comment Share on other sites More sharing options...
Superdan Well-Hard Bangin' Member Member 3,422 Member For: 17y 2m 16d Gender: Male Location: Perff, WA Posted 13/03/08 09:30 AM Share Posted 13/03/08 09:30 AM Link to comment Share on other sites More sharing options...
hulk xr6t Member 160 Member For: 17y 20d Posted 14/03/08 04:21 AM Share Posted 14/03/08 04:21 AM Unfortunately, I beleive there is too much power coming out of these cars, gotta be a pain in the ass for the drivetrain and long term reliability.I say valve springs, injectors, cat upgrade and centre muffler, phoon cooler and edit, 10-12psi. dont do anymore.Maybe get near 300rwkw. I wouldnt go over if its a daily driver. or else you will pay up big time. $$$ Gearbox and diff giving up the ghost as well as excessive wear on motor. not just once, many a time over.. $$$$$Ive seen the error in my ways, scared to give it a bootful as Im thinking its gonna cost ya some more. Do you want a drag car or a powerful reliable cruiser. Put a lid on the power you aiming for and balance it with your intended use of the vehicle. Link to comment Share on other sites More sharing options...
apcdave Member 31 Member For: 21y 1m 29d Gender: Male Location: Mt Kuring-Gai ~ NSW Posted 14/03/08 05:23 AM Share Posted 14/03/08 05:23 AM Hulk, I hate to burst your bubble but you have got nearly all of it wrong but then again I could be wrong.Facts: 2003 March 18th XR6T, 4 days to 5 years old 158,000 kms, restricted to 340 RWKW and not afraid to use it.Fellow cruisers will tell you that this old fart can whip it good.Get 50kms per tank more on both cycles than when standardHad the auto trans rebuilt at 150,000 kms, diff and cv's still working, engine has had only valve springs upgraded.However the point missed is STOP the GO. Brake upgrade is a real necessity, I have slotted rotors, racing pads and dot 5.1 fluid.Seen enough cruisers imitating a bush fire at the bottom of conrod straight.Focused Link to comment Share on other sites More sharing options...
Focused Member 10 Member For: 16y 8m 13d Gender: Male Location: Adelaide Posted 14/03/08 06:28 AM Author Share Posted 14/03/08 06:28 AM Yeah that's what im thinking Hulk. Nothing crazy but some decent power. 300rwkw is round the mark that im looking for and nothing more. Link to comment Share on other sites More sharing options...
XRSCAR Member 414 Member For: 16y 8m 27d Gender: Male Location: FTG, Victoria Posted 15/03/08 01:08 AM Share Posted 15/03/08 01:08 AM Im still kinda new here aswell!Got mine around a month ago and loving every minute of it! Link to comment Share on other sites More sharing options...
neo Member 376 Member For: 16y 7m 26d Gender: Male Location: The Ville Posted 16/03/08 11:45 PM Share Posted 16/03/08 11:45 PM hey grats a welcome. I am keeping mine stock for a bit going to put an exhaust and get a full service so every thing is running right. gauges and some mags then ill look at more performance I have to get use to the car. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now