F6BF Member 438 Member For: 19y 4d Location: Sydney Posted 12/03/08 03:53 AM Share Posted 12/03/08 03:53 AM Best 60ft time to date is 2.26 car in street trim 3/4 fuel tank more stall speed don,t seem to make it any faster just less traction. std tyres at 22psiU should be able to get it down to 2.0 on street tyres and knock of 4/10ths of your et^^ so did I..My P.B is a 1.7 60ftWell done mate, that would have to be the best 60ft for a ZF without the bottleIs anyone in perth doing the zf auto edit? from what I have read it is very new and not all tuners are aware of it or don't know how to do it?Get in touch with Simon from Extreme tuning perth Link to comment Share on other sites More sharing options...
F6BF Member 438 Member For: 19y 4d Location: Sydney Posted 12/03/08 04:03 AM Share Posted 12/03/08 04:03 AM I thought these boxes performed best in Perf Drive???Shifting manual mode u can shift at the end of your power band, usually being 5500 rpm for most editted cars, otherwise in performance mode wont change gears till 6200Also firmer sharper quicker shifts are achieved in manual mode Link to comment Share on other sites More sharing options...
bf xr6t Member 10 Member For: 16y 11m 25d Gender: Male Location: Perth NOR Posted 12/03/08 06:36 AM Author Share Posted 12/03/08 06:36 AM U should be able to get it down to 2.0 on street tyres and knock of 4/10ths of your etWell done mate, that would have to be the best 60ft for a ZF without the bottleGet in touch with Simon from Extreme tuning perthTo get a 2.0 60ft time from the 6 speed do you use the 2/1 shift to build some boost or just stall up in 1st, also what revs are people stalling to when getting 2.0 60ft ? Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 10m 9d Gender: Male Location: SW Sydney Posted 12/03/08 06:43 AM Share Posted 12/03/08 06:43 AM I'm pretty sure the ZF will only stall to around 2200 rpm as the std stall converter won't go any further Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 18d Gender: Male Location: Canning Vale, W.A Posted 13/03/08 03:01 AM Share Posted 13/03/08 03:01 AM Mines goes over 3000 rpm.My boost gauge tells me I'm getting roughly 10-12 psi off the line which is why I'm consistantly getting 1.7-1.8 60fters On MT Streets of course. Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 10m 9d Gender: Male Location: SW Sydney Posted 13/03/08 03:02 AM Share Posted 13/03/08 03:02 AM that's pretty good mate Link to comment Share on other sites More sharing options...
NVYDF6 Built F6 & VE SS-V Donating Members 582 Member For: 17y 4m 23d Gender: Male Location: Melb Posted 13/03/08 03:14 AM Share Posted 13/03/08 03:14 AM (edited) Mines goes over 3000 rpm.My boost gauge tells me I'm getting roughly 10-12 psi off the line which is why I'm consistantly getting 1.7-1.8 60fters On MT Streets of course.what have you done to get it to hit boost in first? Edited 13/03/08 03:15 AM by Bionic Rspec Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 18d Gender: Male Location: Canning Vale, W.A Posted 13/03/08 08:12 AM Share Posted 13/03/08 08:12 AM Ive had the 6 speed edited By my tuner. Link to comment Share on other sites More sharing options...
DBOSS Faster than any BTA,XTC,Autotech, Nizpro and Tunehouse car Member 3,918 Member For: 21y 5m 24d Location: D SHIRE! Posted 13/03/08 09:57 PM Share Posted 13/03/08 09:57 PM ^^ so did I..My P.B is a 1.7 60ft1.7 what??And do you have a timeslip??CYA JEFF Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now