whistler6 Member 417 Member For: 17y 8m 2d Gender: Male Location: VIC Posted 05/03/08 07:04 AM Share Posted 05/03/08 07:04 AM Hi guys, Just after some suggestions to anything else I need before I get a tune.Ive collected so far - Process West stage 1 cooler & UBP, K & N filter and 2nd intake, getting Nizpro valve springs fitted along with a Walbro fuel pump next Wednesday, X-Force 3.5'' exhaust.What size metal cat should I buy - 3.5'' or 4''Looking for a trans cooler - either B&M or PWR. ??Getting the trans flushed next week too, along with new diff oil and fuel filter.Has that covered it???Thanks heaps! Link to comment https://www.fordxr6turbo.com/forum/topic/43274-anything-else-i-need/ Share on other sites More sharing options...
kissy Member 132 Member For: 18y 1m 17d Gender: Male Location: S.E. Melbourne Posted 05/03/08 08:25 AM Share Posted 05/03/08 08:25 AM Bigger injectors Link to comment https://www.fordxr6turbo.com/forum/topic/43274-anything-else-i-need/#findComment-642110 Share on other sites More sharing options...
whistler6 Member 417 Member For: 17y 8m 2d Gender: Male Location: VIC Posted 05/03/08 09:31 AM Author Share Posted 05/03/08 09:31 AM Forgot to ad, will be doing seimens injectors/ported wastegate and actuator mod and tune of course! Link to comment https://www.fordxr6turbo.com/forum/topic/43274-anything-else-i-need/#findComment-642140 Share on other sites More sharing options...
seventytwo Still have a turbo, it's just on a diesel. Lifetime Members 5,368 Member For: 19y 9m 24d Gender: Male Location: The 8th Dimension Posted 05/03/08 09:34 AM Share Posted 05/03/08 09:34 AM and money for rear Tyres. @ 300kw + you are going to need a steady supply. Link to comment https://www.fordxr6turbo.com/forum/topic/43274-anything-else-i-need/#findComment-642141 Share on other sites More sharing options...
sleeper69 Member 179 Member For: 19y 8d Gender: Male Location: melbourne Posted 05/03/08 11:15 AM Share Posted 05/03/08 11:15 AM And a auto that's going to hold up to all that new power!!!!! Link to comment https://www.fordxr6turbo.com/forum/topic/43274-anything-else-i-need/#findComment-642208 Share on other sites More sharing options...
whistler6 Member 417 Member For: 17y 8m 2d Gender: Male Location: VIC Posted 05/03/08 10:17 PM Author Share Posted 05/03/08 10:17 PM I figured I might be able to get away with it, if I flush the trans out and put a trans cooler in for the time being.... it still shifts smooth as now, but that's stock.And I need new back tyres as it is now, so they want last long Link to comment https://www.fordxr6turbo.com/forum/topic/43274-anything-else-i-need/#findComment-642323 Share on other sites More sharing options...
smarty Member 37 Member For: 17y 10m 7d Gender: Male Location: Adelaide Posted 10/03/08 12:41 PM Share Posted 10/03/08 12:41 PM bigger the cat the betterbigger the cooler the better .. by- pass radiator tooyour on your way to low 300 then Link to comment https://www.fordxr6turbo.com/forum/topic/43274-anything-else-i-need/#findComment-644267 Share on other sites More sharing options...
smarty Member 37 Member For: 17y 10m 7d Gender: Male Location: Adelaide Posted 10/03/08 12:44 PM Share Posted 10/03/08 12:44 PM I forgot to add if your doing all your other oil and fluids...try NULON in your engine .. full synthetic ive heard its real good $$$$$ but Link to comment https://www.fordxr6turbo.com/forum/topic/43274-anything-else-i-need/#findComment-644269 Share on other sites More sharing options...
whistler6 Member 417 Member For: 17y 8m 2d Gender: Male Location: VIC Posted 10/03/08 10:56 PM Author Share Posted 10/03/08 10:56 PM was going to just get the 3.5'' cat since it'll just mate up to my 3.5'' exhaust..will be getting a B&M trans cooler since I think they're a bit better/thicker than the PWR units....and I usually use Mobile1 fully synthetic engine oil but will to try nulon! Link to comment https://www.fordxr6turbo.com/forum/topic/43274-anything-else-i-need/#findComment-644358 Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 18y 2m 24d Gender: Male Location: SW Sydney Posted 10/03/08 11:11 PM Share Posted 10/03/08 11:11 PM just make sure where they are measuring the car from, 3.5" cat body is too small, 4" - 5" bodies are the best for flow on these cars Link to comment https://www.fordxr6turbo.com/forum/topic/43274-anything-else-i-need/#findComment-644364 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now