Wenier Donating Members 1,736 Member For: 14y 10m 8d Gender: Male Location: Christchurch, New Zealand Posted 22/10/11 05:49 AM Share Posted 22/10/11 05:49 AM Well first check would be battery voltage to make sure that is alright. Another simple step would be disconnect the battery leave it off for 5-10mins then connect back up and see if that makes any difference.Start with all the free and cheap things. Link to comment Share on other sites More sharing options...
Jimbob Member 148 Member For: 17y 7m 8d Gender: Male Location: Melbourne Posted 22/10/11 05:58 AM Share Posted 22/10/11 05:58 AM Now that I think about it you may have hit the nail on the head with the battery I looked up when I bought and its almost 3 years old mix that with the fact the car has not been run for 3 weeks we may have a winner. either way I think I should get a new battery so im going to give that a shot and if that does not work ill recheck everything I have done for the second time and if its still not working ill come back on hear and :cry: about it Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 15y 11m 10d Gender: Male Posted 01/02/12 09:31 PM Share Posted 01/02/12 09:31 PM I bought some inconel studs and stage 8 nuts. I took all the heat shields off but it seems like you can't replace the studs with these ones (slightly too long) with the turbo and manifold still in place. I think it will all have to come out, which means a Saturday job, not a 9pm at night job :( Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 16d Gender: Male Posted 11/07/12 02:06 PM Share Posted 11/07/12 02:06 PM Is it hard to fit the stage 8 fasteners while the turbo is attached?Mine is removed with the manifold but I see you can't fit the bottom two studs and fasteners while it's out as the turbo bracket needs to be bolted inbetween. Link to comment Share on other sites More sharing options...
1600dave Donating Members 872 Member For: 13y 10m 17d Posted 12/07/12 03:18 AM Share Posted 12/07/12 03:18 AM Maybe remove the bracket and manifold, assemble it all, then refit turbo, manifold and bracket as one? Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 16d Gender: Male Posted 12/07/12 04:51 AM Share Posted 12/07/12 04:51 AM Yeah was thinking of that, will have to look and see if the bracket is easily removable :( Link to comment Share on other sites More sharing options...
Haydo83 Member 17 Member For: 12y 5m 16d Gender: Male Location: Newcastle NSW Posted 21/08/12 01:17 PM Share Posted 21/08/12 01:17 PM Hey.Can anyone give me any helpful tips on getting the clip back on the wastegate arm for the actuator.Just replaced my actuator as I think that was brrrrr problem,took me ages to get the clip off cos its in such a sh*t spot,couldnt get the clip back on so I had to put it all back together to get to work and now the actautor has popped off the arm so now ive got no boost :( any hints would be much apprectiated Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 26d Gender: Male Location: Adelaide Posted 21/08/12 09:47 PM Share Posted 21/08/12 09:47 PM Bud do it from under the car much easier Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 3d Gender: Male Location: Perth Posted 21/08/12 11:38 PM Share Posted 21/08/12 11:38 PM easiest way to refit the clip on the car is to remove the dump pipe and as Jetters said, do it from under the car. Link to comment Share on other sites More sharing options...
Haydo83 Member 17 Member For: 12y 5m 16d Gender: Male Location: Newcastle NSW Posted 22/08/12 11:58 AM Share Posted 22/08/12 11:58 AM Hey.thanx for the advice guys me and a mate spent all arvo trying to get at it and we lost a few c clips in the process and managed to get a hair clip in it lol for a few klms before she popped off.got a gasket kit on its way so il pull that dump pipe out then should be a peice of cake. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now