Mattttty Member 66 Member For: 18y 25d Gender: Male Posted 08/02/08 09:32 PM Share Posted 08/02/08 09:32 PM hey the stock radio screen where it shows the air con and all that is screwed I have no air con or anything and every time I put a new fuse in it blows it straight away any ideas. thanks Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 8m 16d Gender: Male Location: Victoria Posted 08/02/08 10:12 PM Share Posted 08/02/08 10:12 PM Exactly which fuse is blowing?Have you done anything to the car electrically before this started happening? Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 11m 4d Gender: Male Location: SW Sydney Posted 08/02/08 10:53 PM Share Posted 08/02/08 10:53 PM funny this should come up, I have a fuse problem at the moment too. Its the fuse for my tail lights and interior gauge illumination, also controls the Auto lights switch and the fog lamps.15A fuse blows when the car axle tramps, and last night it did it when I came off the power in 4th gear.I originally thought it was a pair of LED bulbs I put in the tailights, but I have replaced those with std items and it continues to happenAny ideas guys? Link to comment Share on other sites More sharing options...
Mattttty Member 66 Member For: 18y 25d Gender: Male Posted 14/02/08 06:39 AM Author Share Posted 14/02/08 06:39 AM hey just bought a 600wat 4 channel pioneer amp for my speakers it put out 60 wats rms x 4 at 4ohms wat I need. What speaker wire should I use to get the best results thanks Link to comment Share on other sites More sharing options...
PURVIE Sexy Member Donating Members 524 Member For: 18y 1m 1d Gender: Male Location: Berwick, VIC Posted 15/02/08 02:31 AM Share Posted 15/02/08 02:31 AM Hey mate,14 Gauge copper speaker wire is the way to go these days, its the thick stuff and you can get it from any automotive shop or even a places like JB Hi-Fi.Heres a pic to help you out: Link to comment Share on other sites More sharing options...
Mattttty Member 66 Member For: 18y 25d Gender: Male Posted 24/02/08 11:23 PM Author Share Posted 24/02/08 11:23 PM hey guys would you be able to tell me where is the best place to ground an amp in a ba ute thanks Link to comment Share on other sites More sharing options...
Mattttty Member 66 Member For: 18y 25d Gender: Male Posted 25/02/08 02:25 AM Author Share Posted 25/02/08 02:25 AM hey does any 1 know an easy way to run new wires to the front speakers been tryin for a while but can get them to go through the gromet thin Link to comment Share on other sites More sharing options...
XR06T Silver Donating Members 4,146 Member For: 19y 6m 19d Gender: Male Posted 25/02/08 02:34 AM Share Posted 25/02/08 02:34 AM find the old speaker wires in the footwell, then tie your new ones to the old ones in the door, and pull it through into the footwell. Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 4m 7d Gender: Male Location: Townsville Posted 25/02/08 05:59 AM Share Posted 25/02/08 05:59 AM Pull the rubber boot off of the door and footwell, this allows a straighter path and more room and use either a zip tie or part of a coat hanger to feed it through with the speaker wire taped to it. Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 4m 7d Gender: Male Location: Townsville Posted 25/02/08 06:27 AM Share Posted 25/02/08 06:27 AM From memory I grounded mine near the quarter windows behind the driver or passenger and was fine for me, no interference. Otherwise any other part of the main support structure Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now