CSV_LS1 Member 303 Member For: 20y 10m 19d Gender: Male Posted 14/02/08 01:46 PM Share Posted 14/02/08 01:46 PM Ah that's good to hear. Link to comment Share on other sites More sharing options...
INFLYT Donating Members 784 Member For: 18y 6m 12d Gender: Male Location: N.S.W, Sydney Posted 14/02/08 02:20 PM Share Posted 14/02/08 02:20 PM Wasn't Billsta running over 430 rwkw with the standard ZF Transmission in his Typhoon!? Link to comment Share on other sites More sharing options...
F6_Tornado F6+300+ Member 940 Member For: 20y 2m 14d Location: In The Ute Posted 14/02/08 08:24 PM Share Posted 14/02/08 08:24 PM F6 Tornado is it possible to get a new shaft CNC machined out of higher grade material?Would this resolve the issue?Would be nice if it was as simple as making a new billeted shaft on a CNC machine! But it’s sadly not that simple. The input shaft is part of the first planetary set and it’s integrated into the E clutch pack so another word’s it’s not just a simple shaft that we can beef up.It also goes back through B & A Clutches, the trans/converter pump and then into the converter so very little room to fatten it up @ its entire length.It’s actually very well made and the fact it twists to some degree before fracture is a good sign it has some ductility. If it was too hard or to highly stressed it would fracture without any deformation whatsoever. What we need to do is increase its ductility without making it any harder. So it’s more ductile so as to be able to flex without fatigue, Deformation or fracture. Not so easy considering the size and shape of it but we need to do something with the HP cars now the clutches can take it. Link to comment Share on other sites More sharing options...
Billsta Member 355 Member For: 18y 6m 16d Location: Rolling on my 20's Posted 15/02/08 12:24 AM Share Posted 15/02/08 12:24 AM Wasn't Billsta running over 430 rwkw with the standard ZF Transmission in his Typhoon!? Yeah I still am, I've done the Tranzmax service and the box is still going strong.I think we will see a Phoon with 380rwkw break a 10 second in the near future. Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 11m 14d Gender: Male Location: SW Sydney Posted 15/02/08 12:32 AM Share Posted 15/02/08 12:32 AM from memory Billsta, your car was tuned with some form of sympathy in mind for the inoput shaft, rather than an all or nothing tune from low rpm, is that right?Either way it still goes hard! Link to comment Share on other sites More sharing options...
Billsta Member 355 Member For: 18y 6m 16d Location: Rolling on my 20's Posted 15/02/08 12:39 AM Share Posted 15/02/08 12:39 AM The first tune was for complete top end and the retune now has more mid range and is alot more torquey mid range to top end. Link to comment Share on other sites More sharing options...
DBOSS Faster than any BTA,XTC,Autotech, Nizpro and Tunehouse car Member 3,918 Member For: 21y 6m 30d Location: D SHIRE! Posted 15/02/08 01:26 AM Share Posted 15/02/08 01:26 AM I think we will see a Phoon with 380rwkw break a 10 second in the near future.No std Zf box with std converter and only 380rwklw will crack a 10 sec pass Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 9m 25d Gender: Male Location: Canning Vale, W.A Posted 15/02/08 01:28 AM Share Posted 15/02/08 01:28 AM F6BF has done an 11.1 Link to comment Share on other sites More sharing options...
DBOSS Faster than any BTA,XTC,Autotech, Nizpro and Tunehouse car Member 3,918 Member For: 21y 6m 30d Location: D SHIRE! Posted 15/02/08 01:30 AM Share Posted 15/02/08 01:30 AM With 420+ rwklw though! Link to comment Share on other sites More sharing options...
FSIX Member 566 Member For: 19y 2m 28d Posted 15/02/08 11:08 AM Share Posted 15/02/08 11:08 AM (edited) 40,000 klm over 100 1/4 mile passes, still using factory auto oil flushed twice.I run 355rwkw on the street and 385rwkw on the track..On a DD Dyno in 6F.A lot of credit for the long auto life goes to F6 Tornado (Greg) my auto was doing a little bit of slipping on the track 1st to 2nd gear 10.000klm ago, on F6 Tornado recommendation I changed fluid to trans max z and a filter never looked back, and I now many more followed his lead.. ps: Jimmy good see your auto has come good.. Edited 15/02/08 11:08 AM by FSIX Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now