brute f6 Member 15 Member For: 16y 11m 12d Gender: Male Location: harington park Posted 15/02/08 07:49 AM Author Share Posted 15/02/08 07:49 AM (edited) Hi mate, those are impressive figures.......has it been down the strip yet?last time I went to wsid I pulled 11.6 1/4 125mph 1.998 60ft on 370 rwkw tune 98bp fuel and 18 inch kumho tyers and that was about 6 monhts ago Edited 15/02/08 07:52 AM by brute f6 Link to comment Share on other sites More sharing options...
TUFGSR Member 514 Member For: 19y 10m 19d Posted 15/02/08 08:13 AM Share Posted 15/02/08 08:13 AM Damn!I need some more power!Nice work! Link to comment Share on other sites More sharing options...
fordboy1981 Donating Members 2,075 Member For: 21y 11m 12d Gender: Male Location: Sydney, NSW Posted 15/02/08 09:37 AM Share Posted 15/02/08 09:37 AM from what I've heard it's not possible to get 400rwkw out of a stock turbo, even with a modified flatter... Link to comment Share on other sites More sharing options...
Wright'y Member 226 Member For: 20y 9m 14d Gender: Male Location: Darwin, NT Posted 15/02/08 11:53 AM Share Posted 15/02/08 11:53 AM Yeah mate a few people have gone over 400rwkw with a stockish turbo. Even in the last Performance Ford mag there "project X 450rwkw" made 441rwkw with nothing done to the turbo except the flapper and actuator. Also the white T that ran a 9 was using the stock turbo except the two mods. The fatory turbo once modded is still a pretty good unit. Link to comment Share on other sites More sharing options...
brute f6 Member 15 Member For: 16y 11m 12d Gender: Male Location: harington park Posted 25/02/08 11:46 AM Author Share Posted 25/02/08 11:46 AM Awesome results! I would love to see some photo's ?here is some photos of brute1 Link to comment Share on other sites More sharing options...
Full Monty Member 513 Member For: 17y 6m 7d Gender: Male Location: Melbourne Posted 11/03/08 01:43 AM Share Posted 11/03/08 01:43 AM Great pics Brute!..looks tough!Would you mind posting a pic of your oil cooler setup? where is it mounted, what type etc. (rough cost??)Just looking to get one soon.Gav Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 20y 15d Gender: Male Location: Strapped in and holding on Posted 11/03/08 10:45 AM Share Posted 11/03/08 10:45 AM got my ute back from bta motorsports on friday with smile on my face.the car went in for bta stage4 kit,new rods,pistons,springs,nizpro cooler,nizpro plenum,exaust,injectors,oil cooler,transmision cooler,and water methanol injection.End resault was 408rwkw at 17psi with nice dyno graph.I would like to say thanks to Ali and the boys from Bta for good work they done and all the late nights they put in. Nice work!What's the peak boost figure? (you know, that spike early...........) Good luck with the times.. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 5m 22d Gender: Male Location: OZ Posted 12/03/08 04:02 AM Share Posted 12/03/08 04:02 AM from what I've heard it's not possible to get 400rwkw out of a stock turbo, even with a modified flatter...Youngy's extreme ford tuned manual T made 400+ rwkw's on a dead stock turbo, standard actuator and flapper. 433 with a sniff of race fuel. It IS possible. Had a full 4" exhaust, gutted cat, and full nizpro kit. Link to comment Share on other sites More sharing options...
bcl Toughest BA Turbo Lifetime Members 3,408 Member For: 22y 6d Gender: Male Location: Sydney Posted 12/03/08 04:28 AM Share Posted 12/03/08 04:28 AM Youngy's extreme ford tuned manual T made 400+ rwkw's on a dead stock turbo, standard actuator and flapper. 433 with a sniff of race fuel. It IS possible. Had a full 4" exhaust, gutted cat, and full nizpro kit.The word "stock" is always used loosely.The "stock" turbo used with the Nizpro kit (in 2.5 variant), as used by Alex, myself and others, has special exhaust housing porting to give better max power capability.Brian Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 5m 22d Gender: Male Location: OZ Posted 12/03/08 08:06 AM Share Posted 12/03/08 08:06 AM Ahhh I see well youngy's was straight from factory style.....infact it actually had damaged compressor turbine blades when it was pulled off. Simon (XFT) can confirm all this. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now