MRDOSE Member 1,195 Member For: 16y 10m 14d Gender: Male Location: Sydney Posted 24/01/08 03:28 AM Author Share Posted 24/01/08 03:28 AM damn... I bought this car with the intentions of bags.. new I shoulda bought a clubbie Link to comment Share on other sites More sharing options...
gunners2009 Inactive Members 1 Member For: 16y 9m 14d Posted 29/01/08 05:09 AM Share Posted 29/01/08 05:09 AM Has anyone done air bags to a XR6T BF Series 2? I also have heard that in some states even if you have a engineering certificate they will not pass your car roadworthy... I have also heard that it ruins the handling and makes the car massively airy on the road?I was keen as to do it but those 2 factors were a bit of a turn off...'I looked at price aswell, looking at about 7-9K fully done. Link to comment Share on other sites More sharing options...
loopism Tractor Driver Member 709 Member For: 18y 9m 2d Gender: Male Location: Sydney Posted 29/01/08 05:57 AM Share Posted 29/01/08 05:57 AM Ummm ... see above? Link to comment Share on other sites More sharing options...
rhysy_boi Member 83 Member For: 18y 3m 28d Gender: Male Location: Perth, WA Posted 29/01/08 09:53 AM Share Posted 29/01/08 09:53 AM my mate put bags in the back of his ute, mainly so he could tow his boat without bottoming out. he has a small compressor hidden under the tray behind the cabin and it takes AGES to pump up, over a minute or so, sounds absolutely horrible when pumping up but practical.he payed $2200 installedRhys Link to comment Share on other sites More sharing options...
MRDOSE Member 1,195 Member For: 16y 10m 14d Gender: Male Location: Sydney Posted 29/01/08 09:56 AM Author Share Posted 29/01/08 09:56 AM hm... I wonder if the diffrence is that large between the ute and sedan... Link to comment Share on other sites More sharing options...
Josh636 Member 65 Member For: 17y 1m 9d Gender: Male Location: Mount Isa Posted 29/01/08 10:13 AM Share Posted 29/01/08 10:13 AM You can get airbags for the rear on ebay for about $500, just to bags that sit between the chassis and spring and you pump them up at the servo or if you have a onboard compressor. They alow you to put the lowest springs in then just pump up to ride height when driving or got a load. Just look up mini turcks on the net heaps of dodgy stuff there, you could take all the leafs out cept the main one and then put the bags in cut the bump stops out and it would sit low as. Probably would trap like a bastard though. Link to comment Share on other sites More sharing options...
Meggs_83 Member 114 Member For: 17y 7m 11d Gender: Male Location: Esperance Posted 29/01/08 10:33 AM Share Posted 29/01/08 10:33 AM Try www.probag.com.au it looks like they did XRLNCE and an AU uteP.O BOX 346 Wollongong NSW 2530. Telephone: 02 4261 3742. Fax: 02 4261 9543. Email: info@probag.com.au Link to comment Share on other sites More sharing options...
MRDOSE Member 1,195 Member For: 16y 10m 14d Gender: Male Location: Sydney Posted 29/01/08 10:46 AM Author Share Posted 29/01/08 10:46 AM yeah iv been on this site heaps, I looked at the pics n seen XRLNCE but in the latest issue of street fords it says and I quote ''22inches- No Bags!'' Link to comment Share on other sites More sharing options...
Meggs_83 Member 114 Member For: 17y 7m 11d Gender: Male Location: Esperance Posted 30/01/08 09:52 AM Share Posted 30/01/08 09:52 AM might have changed but did you see the AU ute? so they must be willing to do fords, unlike everyone else who just does crappydores Link to comment Share on other sites More sharing options...
MRDOSE Member 1,195 Member For: 16y 10m 14d Gender: Male Location: Sydney Posted 30/01/08 10:24 AM Author Share Posted 30/01/08 10:24 AM yeah iv seen the AU, but people tell me the problems are with BAs, also iv seen a ba ute bagged so I dunno maybe its only in sedans.. I dunno I never get a chance to call probag cuz I work nights as im on the work comp now haha n they dont respond to emails. als these cars that are bagged could also have forked out for the customs fabrications.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now