bentxr Member 55 Member For: 18y 3m 27d Gender: Male Location: woodberry Posted 08/01/08 03:08 AM Share Posted 08/01/08 03:08 AM what will it handle with stock injectors and exhaust.. have a generic tune in at the moment just installing the maual boost controller what will it take Link to comment Share on other sites More sharing options...
XR06T Silver Donating Members 4,146 Member For: 19y 6m 5d Gender: Male Posted 08/01/08 03:12 AM Share Posted 08/01/08 03:12 AM I think the overboost protection will kick in before you get too much more power out of her..manual boost controllers dont seem to work on these cars.. by all means give it a go, you may even get a coupla psi outta it! Link to comment Share on other sites More sharing options...
2fardown Member 526 Member For: 19y 7m 16d Gender: Male Location: Brisbane Posted 08/01/08 03:22 AM Share Posted 08/01/08 03:22 AM A couple of things scare me in your post "generic tune" and "manual boost control". My advice, don't touch it, leave this to a professional. You will risk leaning it out and causing all sorts of problems I.e. engine failure. If you are contemplating fitting a blead valve style boost control then don't.Go and spend $500 and get a custom tune. Link to comment Share on other sites More sharing options...
SCRIBR Yaris member Member 4,486 Member For: 18y 6m 6d Gender: Male Posted 08/01/08 03:47 AM Share Posted 08/01/08 03:47 AM my understanding was manual boost controllers (I.e. older style ones on skylines etc) don't work on BA-BF's as the computer just compensates and tries to keep boost at the level it "should be".eBoost2 is a product people using, but I am not familiar with it. Link to comment Share on other sites More sharing options...
f-wolf Member 897 Member For: 17y 8m 3d Gender: Male Location: ACT Posted 08/01/08 04:40 AM Share Posted 08/01/08 04:40 AM This is what the ford Workshop Manual has to say.Don't play with it ! Spend some money and get the Pros to do it for you. Link to comment Share on other sites More sharing options...
BFHOON Donating Members 1,932 Member For: 18y 9m 3d Gender: Male Location: nsw Posted 08/01/08 05:41 AM Share Posted 08/01/08 05:41 AM I agree dont play with it, however any type of boost controller will work bleed valve or electronic as long as u have the edit.mines set to a max level and I can adjust down from that point.it is best to get a tuner to set up the boost controller on the dyno along with the edit so they work together, in saying that you may as well just get a custom tune and forget the ebc cos the standard ford boost controller works well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now