Jump to content

How Much Power Should I Have?


XRDOSE

Recommended Posts

  • BIGRED
  • Donating Members
  • Member For: 17y 9m 26d
  • Gender: Male
  • Location: Sth East Melb

hey guys just wondering...my car has siemens dekas, valve springs, centre muffler removed, f6 cooler and a custom headsex tune running about 12psi but I havent dynoed it yet as it was off the road for quite some time, what sort of power would you guess I would have? and if I was to fit a high flow cat, pw stage 1 cooler and maybe a walbro fuel pump what can I expect?

Thanks :spoton:

Link to comment
Share on other sites

  • Hench, but no longer shredded or tanned.
  • Member
  • Member For: 17y 9m 21d
  • Gender: Male
  • Location: Canning Vale, W.A

Without the Cat done you'll be restricted to the 270-280 mark mate.

Once you've done that, with a decent I/C you'll get a nice consistent 300+ I'm guessing about 305-310rwkw

What gear box are you running mate?

Link to comment
Share on other sites

  • Donating Members
  • Member For: 19y 5m 7d
  • Gender: Male
  • Location: Melb

currently you have approx 250rwkw... your power is limited because of your cat, you only have approx 9psi boost from memory with duty cycle of 1 (ie, cant command any more boost)..

Changing the cat will give you approx 12psi boost, and give you the ability to get approx 270rwkw, and then with a good intercooler and a 12psi actuator, you should easy crack 300rwkw..

valve springs will also need attention if you havent already changed them yet..

Link to comment
Share on other sites

  • BIGRED
  • Donating Members
  • Member For: 17y 9m 26d
  • Gender: Male
  • Location: Sth East Melb
Without the Cat done you'll be restricted to the 270-280 mark mate.

Once you've done that, with a decent I/C you'll get a nice consistent 300+ I'm guessing about 305-310rwkw

What gear box are you running mate?

its 4-speed auto. Might have to look at getting it toughened up if im hitting 300+ would u think?

Link to comment
Share on other sites

  • BIGRED
  • Donating Members
  • Member For: 17y 9m 26d
  • Gender: Male
  • Location: Sth East Melb
currently you have approx 250rwkw... your power is limited because of your cat, you only have approx 9psi boost from memory with duty cycle of 1 (ie, cant command any more boost)..

Changing the cat will give you approx 12psi boost, and give you the ability to get approx 270rwkw, and then with a good intercooler and a 12psi actuator, you should easy crack 300rwkw..

valve springs will also need attention if you havent already changed them yet..

hey danny my car actually hits 15psi when I boot it then comes straight back down to 12psi and sits there that's all we could tune it to because of the cat and I also did the valve springs at nizpro before I took it to you, guess u cant remember every car u tune aye :P I definately will be getting the hi-flow cat after new years and we'll have to book it in at the dyno to see what shes really doing! CANT WAIT!! :buttrock:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'