StevesXR6T Member 44 Member For: 19y 3m 6d Gender: Male Location: Ormeau,QLD Posted 02/12/07 07:44 AM Share Posted 02/12/07 07:44 AM I have installed a PWR transmission cooler and bypassed the radiator completely. I have a trans temp gauge and the temp sits between 150F and 170F. I am fairly sure that the temp sensor is on the return line from the cooler so this should be a good indication of the trans sump temperature where the gauge is suppose to be mounted. Is this a normal range.Thanks Link to comment Share on other sites More sharing options...
F6BF Member 438 Member For: 18y 11m 18d Location: Sydney Posted 02/12/07 08:54 AM Share Posted 02/12/07 08:54 AM What were your temps before fitting the trans cooler? Link to comment Share on other sites More sharing options...
StevesXR6T Member 44 Member For: 19y 3m 6d Gender: Male Location: Ormeau,QLD Posted 02/12/07 10:08 AM Author Share Posted 02/12/07 10:08 AM I dont know what the temps were before the cooler install I put the gauge in after the cooler Link to comment Share on other sites More sharing options...
F6BF Member 438 Member For: 18y 11m 18d Location: Sydney Posted 02/12/07 01:42 PM Share Posted 02/12/07 01:42 PM Fair enough mate....would have been good to see before and after figures Link to comment Share on other sites More sharing options...
StevesXR6T Member 44 Member For: 19y 3m 6d Gender: Male Location: Ormeau,QLD Posted 04/12/07 06:26 AM Author Share Posted 04/12/07 06:26 AM Fair enough mate....would have been good to see before and after figuresyeah it would be. I am hoping that maybe someone may have a temp gauge on a standard one so I can get an idea of the standard figures. Link to comment Share on other sites More sharing options...
gregaust Member 48 Member For: 21y 2m 11d Gender: Male Location: QLD Posted 19/12/07 05:33 AM Share Posted 19/12/07 05:33 AM yeah it would be. I am hoping that maybe someone may have a temp gauge on a standard one so I can get an idea of the standard figures.That is a good temp to have....http://www.txchange.com/heatchrt.htm Link to comment Share on other sites More sharing options...
f-wolf Member 897 Member For: 17y 7m 5d Gender: Male Location: ACT Posted 19/12/07 05:40 AM Share Posted 19/12/07 05:40 AM I have installed a PWR transmission cooler and bypassed the radiator completely. I have a trans temp gauge and the temp sits between 150F and 170F. I am fairly sure that the temp sensor is on the return line from the cooler so this should be a good indication of the trans sump temperature where the gauge is suppose to be mounted. Is this a normal range.ThanksThat is between 66 C and 77 C. I can't see a problem with those numbers. Link to comment Share on other sites More sharing options...
gilto Member 218 Member For: 17y 5m 1d Gender: Male Posted 19/12/07 05:53 AM Share Posted 19/12/07 05:53 AM I am having a brand new radiator installed on Friday. I also have the PWR trans cooler (the big one).I was going to run the transmission fluid firstly through the PWR cooler and then the radiator as well.I can't see a reason to bypass the radiator......2 coolers should be better than 1 right...???? Link to comment Share on other sites More sharing options...
f-wolf Member 897 Member For: 17y 7m 5d Gender: Male Location: ACT Posted 19/12/07 06:01 AM Share Posted 19/12/07 06:01 AM (edited) I am having a brand new radiator installed on Friday. I also have the PWR trans cooler (the big one).I was going to run the transmission fluid firstly through the PWR cooler and then the radiator as well.I can't see a reason to bypass the radiator......2 coolers should be better than 1 right...????I would not use the Radiator to cool the Auto Transmission !!If the Radiator system fails, you finish up with oil in your cooling system, or coolant in your Transmission. !!This is why !http://www.fordxr6turbo.com/forum/index.ph...=13377&st=0 Edited 19/12/07 06:08 AM by f-wolf Link to comment Share on other sites More sharing options...
Ernie Member 224 Member For: 17y 7m 18d Gender: Male Location: Sydney Posted 19/12/07 06:06 AM Share Posted 19/12/07 06:06 AM I have installed a PWR transmission cooler and bypassed the radiator completely. I have a trans temp gauge and the temp sits between 150F and 170F. I am fairly sure that the temp sensor is on the return line from the cooler so this should be a good indication of the trans sump temperature where the gauge is suppose to be mounted. Is this a normal range.Thanksthose temps are fine.........drag cars you kind of panic when temps hit above 250 degrees F as it starts to boil the fluid and slips the clutch packs badly.in a street car 150 to 180 is pretty much the norm. when you start to hit 200 and above.......... start drivings slowly till it cools down.PWR make great trans coolers as these are what I use Ern Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now