hanra Into the laaaake Member 1,532 Member For: 17y 7m Gender: Male Location: Nrth Qld Posted 21/11/07 02:49 AM Share Posted 21/11/07 02:49 AM My ute still has the stock tune in it, (CAPA box sittin in my bedroom awaiting custom tune). Ive already got a K&N panel filter and Typhoon CAI. I was intending on fitting this Monza styled intercooler and process west UBP over the weekend. I generally baby the car around anyways, but how safe is it to drive it with these mods? Everything else is stock as a rock. It runs BP ultimate, has newly replaced NGK platinum irridium plugs still gapped to 1.1mm. Running 5psi boost currently. Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 4m 25d Gender: Male Location: Melbourne, VIC Posted 21/11/07 02:59 AM Share Posted 21/11/07 02:59 AM I intend on doing sorta the same thing.. Im gonna get my Valve Springs done, then flash bact to my stock tune, Add the monza and UBP, then get it tuned... I plan on doing these mods in a row, and as soon as possible one from the other so I dont drive it around as much.. I've been told by a few people its ok as long as I dont give it any 'curry' or it will just overboost and go into limp mode. Link to comment Share on other sites More sharing options...
hanra Into the laaaake Member 1,532 Member For: 17y 7m Gender: Male Location: Nrth Qld Posted 21/11/07 03:03 AM Author Share Posted 21/11/07 03:03 AM Yeah im wondering how the I/C and UBP will effect boost..... Link to comment Share on other sites More sharing options...
ZAP No boost, no bottle, just my foot on the throttle! Lifetime Members 7,935 Member For: 20y 11m 1d Gender: Male Location: Sydney Posted 21/11/07 03:08 AM Share Posted 21/11/07 03:08 AM The intercooler will cause it to overboost and thus into limpmode.Valvesprings are fine as is airfilter and UBP, but exhaust, injecotrs or cooler will end the fun Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 11m 7d Gender: Male Location: SW Sydney Posted 21/11/07 03:22 AM Share Posted 21/11/07 03:22 AM I ran my cat back exhaust , around battery pipe, PWR cooler on the generic 8psi tune, and it was fine, probably a little lean though, this was with a stock engine too Link to comment Share on other sites More sharing options...
hanra Into the laaaake Member 1,532 Member For: 17y 7m Gender: Male Location: Nrth Qld Posted 21/11/07 03:39 AM Author Share Posted 21/11/07 03:39 AM I wasnt intending on running the generics. I wanted to just keep the stock tune. So it mite be ok, provided I dont give it a boot full. Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 4m 25d Gender: Male Location: Melbourne, VIC Posted 21/11/07 03:40 AM Share Posted 21/11/07 03:40 AM Yeah im wondering how the I/C and UBP will effect boost.....If the ECU detects extra boost it will go into limp mode... and potentialy saving you from any damage.. Link to comment Share on other sites More sharing options...
hanra Into the laaaake Member 1,532 Member For: 17y 7m Gender: Male Location: Nrth Qld Posted 21/11/07 04:50 AM Author Share Posted 21/11/07 04:50 AM Yeah I figured that, but I was hoping with those mods that it wouldnt overboost.... Link to comment Share on other sites More sharing options...
BFHOON Donating Members 1,932 Member For: 18y 9m 21d Gender: Male Location: nsw Posted 21/11/07 05:05 AM Share Posted 21/11/07 05:05 AM with a full plazmaman stage 1 kit on the dyno with the stock tune mine ran 211.5 rwkw with perfect afr`s.at c&v.this may vary with different coolers but I would say the cat is the thing that when changed makes the most difference to the stock tune bringing on limp mode instantly.this is just my experience and im no expert. Link to comment Share on other sites More sharing options...
hanra Into the laaaake Member 1,532 Member For: 17y 7m Gender: Male Location: Nrth Qld Posted 21/11/07 05:12 AM Author Share Posted 21/11/07 05:12 AM Im still running full stocko exhaust system. Ill fit the I/C and UBP this weekend and see how it goes. As I said its only running 5psi at the momment. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now