ETM Member 1,194 Member For: 17y 9m 9d Gender: Male Location: syd south Posted 16/12/07 03:20 AM Share Posted 16/12/07 03:20 AM theres heaps of room compared to many other cars and I always fit a 4" dump pipe.fitting it on the ba will be a snack Link to comment Share on other sites More sharing options...
bcl Toughest BA Turbo Lifetime Members 3,408 Member For: 21y 11m 28d Gender: Male Location: Sydney Posted 16/12/07 03:53 AM Share Posted 16/12/07 03:53 AM It depends on how well you integrate the wastegate pipe into the dump, and at what point you integrate it.I plan to redo the way mine is integrated, merging further downstream. If you have well integrated piping perhaps you could show us what you have done.Brian Link to comment Share on other sites More sharing options...
IceMyButt Link Member 421 Member For: 20y 6m 21d Gender: Male Location: Sydney Posted 16/12/07 04:24 AM Share Posted 16/12/07 04:24 AM Yes it is plumbed back in, but room is a little tight in that area, mainly due to the steering arm. I havent seen yet exactly where the pipe plumbs back in as the car is off the hoist at the minute.Hopefully not too much longer before the first stage is finished and we will see how the set-up goes. Onwards and upwards from there! Link to comment Share on other sites More sharing options...
JP300 Donating Members 842 Member For: 19y 3m 9d Gender: Male Location: Sydney Posted 16/12/07 05:35 AM Share Posted 16/12/07 05:35 AM (edited) Hey Phil, Good to see that you are still enthusiastic about the car. I guess you've been busy with work. How far is it from getting back on the track for a run? Edited 16/12/07 05:36 AM by JP300 Link to comment Share on other sites More sharing options...
IceMyButt Link Member 421 Member For: 20y 6m 21d Gender: Male Location: Sydney Posted 16/12/07 07:00 AM Share Posted 16/12/07 07:00 AM Hey John,Yeah - I am still mad about the car and somewhat desperate for it to make it back to the track. We should see from really good progress this week with Supernats now behind us and I am hoping that we will hit the dyno either by the end of next week, or by mid January when the guys come back to work. We are working hard to step it up in the drag racing stakes, as there hasnt been a whole lot of focus on pushing Adams record....It has stood for a long time. Unfortunately, these things take time and as much as I am keen, it has to be done right the first time with so many components so that I can save alot of pain and wasted time in the future.The car will run a few new ideas, that havent really been done before on the XR6T, so should be pretty unique and innovative as well. I will keep you posted as it gets closer to time. Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 7m 3d Gender: Male Location: Sydney NSW Posted 16/12/07 07:56 AM Share Posted 16/12/07 07:56 AM Awesome to see it being done the right way, good on ya Phil!Should start to give poeple some ideas on what else can be done to acchive big power, as we all know, there are many ways to... Link to comment Share on other sites More sharing options...
HIROLLA Member 10 Member For: 17y 10d Posted 16/12/07 07:58 AM Share Posted 16/12/07 07:58 AM vl boys do it best heheu have to weld the gate shut to use external Link to comment Share on other sites More sharing options...
ETM Member 1,194 Member For: 17y 9m 9d Gender: Male Location: syd south Posted 16/12/07 09:03 AM Share Posted 16/12/07 09:03 AM It depends on how well you integrate the wastegate pipe into the dump, and at what point you integrate it.I plan to redo the way mine is integrated, merging further downstream. If you have well integrated piping perhaps you could show us what you have done.Brianwhen a customer gives me free reign to design the turbo system I always put the wastegate off the turbine housing like this.I always run a 4" dump pipe as it gives lightening spool up response.systems like this one are so responsive it's not funny Link to comment Share on other sites More sharing options...
IceMyButt Link Member 421 Member For: 20y 6m 21d Gender: Male Location: Sydney Posted 19/12/07 01:29 AM Share Posted 19/12/07 01:29 AM Leigh, your work is just art! mate - always a pleasure to look at your creations. We will catchup in the near future so you can see the progress and we can look at a couple of options to make adjustments for RACE MODE! Link to comment Share on other sites More sharing options...
AIM-300 SUPERLAP 2011 Member 158 Member For: 17y 8m 28d Gender: Male Location: townsville Posted 19/12/07 11:24 PM Share Posted 19/12/07 11:24 PM wow that looks like one tuff RB Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now