Jump to content

Central Qld


12FEAR

Recommended Posts

  • Donating Members
  • Member For: 16y 5m 20d
  • Gender: Male
  • Location: Gold Coast, QLD

What kind of numbers are being run in rocky??? I have a mate there with a R33 putting out 350rwkw/450rwhp. I might make the trip across for a look see.

Link to comment
Share on other sites

  • Member
  • Member For: 14y 8m 25d
  • Gender: Male
  • Location: Rockhampton

The R33 went 520rwhp. Was a vz maloo 408ci with a gentt kit still using the alloy block... Went 477rwhp @ 3000rpm before the auto told the computer the converter wasn't locking up and it wouldn't rev any higher..

I went 399.9 haha... Pretty good considering we took about 3psi of boost out and 2deg of timing since making 404 on friday.

Link to comment
Share on other sites

  • Member
  • Member For: 14y 8m 25d
  • Gender: Male
  • Location: Rockhampton

Also can't wait to see Brads HI PSI after a proper tune :D 440rwhp? feathering the throttle to keep it at 15psi and 10.0 afr's the whole run.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 16y 5m 20d
  • Gender: Male
  • Location: Gold Coast, QLD

That skyline is owned by James Bradey. Since he started modding it he thinks he's probably put $60000 into it and 3 motors two of which were built. Did he have the screamer pipe or his standard exhaust? Cos his screamer pipe sounds AWESOME. He's running a GT3540 with an external gate, and about 21psi. I should have made the treck across, 480hp on a 36deg day compared to last nights 18degrees, might have seen me crack the 500hp mark (and the fact that I can get trction now with these tyres)

At the last dyno day we went to last summer he only pulled 470rwhp (but it was a 36 degree day), so the colder air must have made a HUGE difference, that or the dyno reads a little high lol.

Link to comment
Share on other sites

  • Member
  • Member For: 18y 6m 9d
  • Gender: Male
  • Location: Central Queensland

First.. Congrats to everyone involved with the whole event. It was very well run and professional. It was great to see the other dyno's projected onto the wall. It really added to the atmosphere..

It was a good day... Mat, you should have come for a a drive over .. Anchor, It was a pleasure to finally meet you.. I'm sure that I'll see you around the place....

Also can't wait to see Brads HI PSI after a proper tune :D 440rwhp? feathering the throttle to keep it at 15psi and 10.0 afr's the whole run.

Bigger and better things to come in the near future.. Custom tune in a few weeks. I'll have the Clevo in XF and have it finished soon, so I will then have more funds to spend on the "T".. I want to get it resprayed, get the BF GT bars and DJR 320 skirts on her... Then I'll start on my spare engine...

Link to comment
Share on other sites

  • 4 weeks later...
  • Donating Members
  • Member For: 16y 5m 20d
  • Gender: Male
  • Location: Gold Coast, QLD

This is wierd replying to my own post... Here's where I'm at...

Well, I got my 'email tune' tonight, flashed it in, and everything is sweet. Slight spike on the shift, but cos all the timing is taken out during shifts dave assures me it's all sweet.

I've now got a shopping list If anyone has any of these I can lay-by, let me know lol

Boost Fuse, Plazmaman air box Got a Process West Race Air Box, Modded Turbo Exhaust Housing, 12 psi actuator, surge tank and pump, bigger cooler Just fitted up my new Process west Stage 3 Kit and a set of valve springs. that's pretty much it. Then its suspension and bushes and she's done so...

I fitted up my new process west stage 3 kit yesterday (it's their new one with a 4 inch cross sectional under headlight silicon pipe), along with the process west race air box. f*ck me the induction noise and turbo spool sound like I'm running a new bigger turbo! Awaiting my new 14psi actuator to arrive, then we'll fit that up and mod the rear housing on the turbo.

Have made a deal with the wife to wait till tax time to 'finish off the car', so at the end of july, start of august I'll finally get my surge tank, and maybe some valve springs. We made the decision today to go for a 95tune, a 98tune and get a straight piece of pipe for the cat & to use it for a dyno queen tune running no filter and a toluline mixer maybe 25-33%. Can't wait.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'