Jump to content

Yay I'm In The 12's


gilto

Recommended Posts

  • Member
  • Member For: 17y 6m 20d
  • Gender: Male

I had a full tank...I filled up 5 minutes before I got to the track to avoid fuel surging....

I couldn't fit another drop in there...it was full to the brim....

Maybe injectors leaning out up top or valve springs???? Not sure.......

Link to comment
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Forged Member
  • Lifetime Members
  • Member For: 17y 11m 11d
  • Gender: Male
  • Location: SW Sydney

I'm surprised you got that much power with standard valve springs! nice result mate! I'd be looking at valve springs really soon, would I be right in sying the AFR's are creeping up a bit toward redline? Just looking out for you dude, I'm not trying to spot holes or anything :spoton:

Edited by senna_T
Link to comment
Share on other sites

  • Faster than any BTA,XTC,Autotech, Nizpro and Tunehouse car
  • Member
  • Member For: 21y 6m 27d
  • Location: D SHIRE!

Well done on your 12 Gilto :spoton:

As the graph shows and what con has said you are out of your little aps injectors with a new set in and some more tuning in the top end to suit watch your time fall

I heard the 60ft was 2.2 and Rob was'nt able to launch on boost,good effort all things considering

CYA JEFF :roflmbo:

Link to comment
Share on other sites

  • Member
  • Member For: 17y 6m 20d
  • Gender: Male

Thanks guys..

Yeah you are right Senna....I'm putting in the deka's in a few weeks which will rectify it and give me better performance up top...

Maybe a 12.5 after that is sorted???

Maybe I got a good set of springs....I do have a really low restricting cat and good intake so I think that takes a lot of pressure of them...

See you soon Jeff....I'm coming after DABOSS :stirthepot::surrenderwave: haha

Link to comment
Share on other sites

  • Forged Member
  • Lifetime Members
  • Member For: 17y 11m 11d
  • Gender: Male
  • Location: SW Sydney

sweet, yeah, I spose the cat will help alot, and as you and jeff say the dekas will get the AFRs right down, con got mine right down to 10.0 at the top of the rev range, so he'll have you running sweet in no time

Link to comment
Share on other sites

  • Donating Members
  • Member For: 19y 5m 8d
  • Gender: Male
  • Location: Melb
Here is my dyno sheet......

Umm... only 120kw @ 110km/h ??

Where's the bottom end?

Every single 4 speed auto dyno sheet I've seen has more power at 110km/h than that....

Last tune I saw had 275rwkw @ 110km/h, and no, This was not the top end power.. I'm just looking at how narrow your power band is.. (Spine, Post up your dyno sheet)

Link to comment
Share on other sites

  • Member
  • Member For: 17y 5m 21d
  • Gender: Male
  • Location: newcastle
Umm... only 120kw @ 110km/h ??

Where's the bottom end?

Every single 4 speed auto dyno sheet I've seen has more power at 110km/h than that....

Last tune I saw had 275rwkw @ 110km/h, and no, This was not the top end power.. I'm just looking at how narrow your power band is.. (Spine, Post up your dyno sheet)

your spot on dude

I have a 4 speed auto and make 230kw at 110km/h my max power is 268

Link to comment
Share on other sites

  • Forged Member
  • Lifetime Members
  • Member For: 17y 11m 11d
  • Gender: Male
  • Location: SW Sydney

mine basically runs down from around 13.5 (at very low rpm) to 10.0, I thought this was just for safety sake, there is a bit more to go on my car, I don't have the dyno sheet with afr's on my pc, maybe this can account for my fuel consumption???

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'