XR64LT Donating Members 678 Member For: 16y 10m 6d Gender: Male Location: sydney Posted 09/06/09 11:01 AM Share Posted 09/06/09 11:01 AM (edited) ba xr6tk&nhigh flow metal catseimens 60 lb injectorsflash tune (custom)typhoon front 1/2 stock exhaustnizpro valve springsstock intercoolerstock plumbing230.5 kw at 5100 at the wheels BUT 780 nm torque at the wheels at 2100PLEASE EXPLAINpiss poor power but massive torque. goes pretty well but not the power I was after or what it should have for the mods. think they must have put a kenworth truck engine in there by mistake. still beats most things around but should have about 300+ for that amount of torque I would thinkthat seems so wrong, have you got a dyno sheet to post up? is it auto or manual? who tuned it if you dont mind me asking Edited 09/06/09 11:04 AM by XR64LT Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 7m 25d Gender: Male Location: Vic Posted 10/06/09 05:44 AM Share Posted 10/06/09 05:44 AM Name: HenzCar: BA 04 XR6T sedanTrans: AUTOPower: 299.6rwkw 401.8hpBoost: 12psiInduction: Rapidsystems 4'' intakeTurbo: StockIntercooler: Rapidsystems V2 D & DValve springs: StockExhaust: Cente mufflered. stock dump cat etcFuel system: intank & bosch 968s Link to comment Share on other sites More sharing options...
dazxr6t Member 11 Member For: 17y 3m 11d Posted 11/06/09 12:42 AM Share Posted 11/06/09 12:42 AM it's auto. tuned by chip torque on the gold coast. as far as boost goes the line could hardly be straighter. holds about 10 1/2 psi right through. I'll try and work out how to post the dyno sheet for you to seeIMG_0001.pdf. not sure if this has worked but I'll post it and see.by the way anyone for a drag race towing trailers I'm in, should go ok thereIMG_0002.pdf Link to comment Share on other sites More sharing options...
dazxr6t Member 11 Member For: 17y 3m 11d Posted 11/06/09 12:53 AM Share Posted 11/06/09 12:53 AM I can look at the attachments on my computer when I click on them please let me know if they don't work for you. if you can look at them as you can see I've got 780 n/m at 2100 then it drops from there to a probably more believable reading of 650 n/m at 3000. the car definitely doesn't need a lot of throttle at low revs to maintain speed but something still doesn't seem right to me. boost is also very constant through the rev range. I would have also thought that if the gearbox was slipping that I wouldn't get such a high torque figure even though that could explain the low kw. I'M LOST Link to comment Share on other sites More sharing options...
XR64LT Donating Members 678 Member For: 16y 10m 6d Gender: Male Location: sydney Posted 11/06/09 11:27 AM Share Posted 11/06/09 11:27 AM maybe the dyno reading wrong, it happens, my brother has a vl turbo and it read 195kws on 1 dyno and 167kws on a different dyno (big difference), I thought a flash tune alone should give u around that sorta figure. have u tried to using a different tuner (different dyno). No disrespect for chip torque but I thought they mainly do wrx's & evo's, dont know how they are with fords. What state/area are you from? Link to comment Share on other sites More sharing options...
dazxr6t Member 11 Member For: 17y 3m 11d Posted 11/06/09 01:01 PM Share Posted 11/06/09 01:01 PM I''m from the gold coast. the guy that owns chip torque has a pretty quick xr6t apparently so you would hope they know how to tune one. we pulled out dyno sheets for about 6 other xr6t's that have been run on the same dyno and they had good KW's. variation was between about 250 and 330 KW for memory but not one of them came near mine for torque. I think the closest was about 80 NM or so less than mine. I'm sort of getting the sh*ts with the car and I don't want to spend any more money on it and not get the results I have been told I should be getting. if someone can come up with a reason why I'm not getting the results I'll consider giving it a go but at the moment I think it's just going to stay how it is. it's not slow by any stretch but it's not mind blowing either. had a run with 2 cars tonight. 1st some fool in a vp ss he was nowhere. the second was some sort of renault hatch or something like that, didn't get a proper look at it, but man it was QUICK. I recon he would have had me if he could have got beside me properly without traffic interfering. Link to comment Share on other sites More sharing options...
Iconic Bionic My engine bay is Bionic Donating Members 3,726 Member For: 18y 7m 26d Gender: Male Location: Freeways Posted 13/06/09 10:16 AM Share Posted 13/06/09 10:16 AM (edited) Name: Its on the leftCar: 2006 BF Mk1 XR6 TurboTrans: 6sp ZF AutoPower: 269.4rwkw (euro III Cat restriction)Boost: 10 Induction: Stock with a standard K&N filterTurbo: StockValve Springs: Stock but has the stronger F6 onesExhaust: StockFuel system: Stock on 98ronPower adder: CV Performance custom tune.I.B. Edited 13/06/09 10:17 AM by Iconic Bionic Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 2m 26d Gender: Male Location: Zombie Birdhouse Posted 13/06/09 10:27 AM Share Posted 13/06/09 10:27 AM Car: 2006 BF PhoonTrans: 6 Speed AutoPower: 370 rwkwBoost: 15psiInduction:F6 CAI , BMC Air FilterTurbo: Stock, 12 lb actuatorValve Springs: StockExhaust: Custom dump pipe, Catco Cat, custom 4" exhaust into twin 3" over the axles. Quad 3"tipsFuel Pump:Process West Surge Tank and Bosch 044 PumpIntercooler: Hyperflow 1000hpInjectors: 60lb DekaPower Adder : CV Performance Link to comment Share on other sites More sharing options...
YPURV4 KILL,KILL,KILL,DIE,DIE,DIE, Member 2,813 Member For: 18y 6m 10d Gender: Male Posted 13/06/09 10:33 AM Share Posted 13/06/09 10:33 AM Interesting exhaust setup buffy got any pics?the 4 inch into the twin 3 inch would be a vey interesting join. Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 2m 26d Gender: Male Location: Zombie Birdhouse Posted 13/06/09 10:36 AM Share Posted 13/06/09 10:36 AM yeah mate , got some pics. There on the ex's puter. See what I can do in the next few days.Total custom proto typePretty tight under there though , good thing is there is hardly any back pressure. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now